Hmmmm, what about a Last Mile Gear CTM-2? It has 5 different modes. A is for 29.5V Cambium, B is for 56V Cambium 320 and 430, and then there are 3 modes C/D/E for various forms of 802.3at. Should I assume one of these will power a 450i AP? What about timing, the documentation is not clear whether these modes can do sync.
From: Sam Lambie Sent: Thursday, December 03, 2015 11:46 AM To: [email protected] Subject: Re: [AFMUG] 450i and Syncinjectors I assume that I will need a separate SyncInjector for the 450i then as I have 450's in the mix as well. Would a Meanwell SD 120-48 PSU Work? On Thu, Dec 3, 2015 at 10:42 AM, Josh Baird <[email protected]> wrote: The SyncInjector can take up to ~57V (ignore the label). You will need to power it with 48V to power the 450i. There are problems with cable distance on SyncInjectors prior to H1 (I beileve). Depending on your cable distance, you may or may not see an issue from what I understand. Josh On Thu, Dec 3, 2015 at 12:41 PM, Sam Lambie <[email protected]> wrote: After looking at some of the earlier posts, I can't really determine if I can use the 450i AP on a gigabit syncinjector. It appears that it want a 48vdc power supply. What is the best way to set this up? Or will it actually accept the 29 vdc power supply on the SyncInjector? Sam -- -- Sam Lambie Taosnet Wireless Tech. 575-758-7598 Office www.Taosnet.com -- -- Sam Lambie Taosnet Wireless Tech. 575-758-7598 Office www.Taosnet.com
