I assume that I will need a separate SyncInjector for the 450i then as I have 450's in the mix as well. Would a Meanwell SD 120-48 PSU Work?
On Thu, Dec 3, 2015 at 10:42 AM, Josh Baird <[email protected]> wrote: > The SyncInjector can take up to ~57V (ignore the label). You will need to > power it with 48V to power the 450i. > > There are problems with cable distance on SyncInjectors prior to H1 (I > beileve). Depending on your cable distance, you may or may not see an > issue from what I understand. > > Josh > > On Thu, Dec 3, 2015 at 12:41 PM, Sam Lambie <[email protected]> wrote: > >> After looking at some of the earlier posts, I can't really determine if I >> can use the 450i AP on a gigabit syncinjector. It appears that it want a >> 48vdc power supply. What is the best way to set this up? Or will it >> actually accept the 29 vdc power supply on the SyncInjector? >> >> Sam >> >> -- >> -- >> *Sam Lambie* >> Taosnet Wireless Tech. >> 575-758-7598 Office >> www.Taosnet.com <http://www.newmex.com> >> > > -- -- *Sam Lambie* Taosnet Wireless Tech. 575-758-7598 Office www.Taosnet.com <http://www.newmex.com>
