Forrest, do you have any input on the cable lengths? On Thu, Dec 3, 2015 at 11:04 AM, Sam Lambie <[email protected]> wrote:
> I am at less than 100' > > > On Thu, Dec 3, 2015 at 11:02 AM, Josh Luthman <[email protected] > > wrote: > >> If you have longer cable runs you want rev I. I don't think Forrest >> specified the lengths... >> >> Josh Luthman >> Office: 937-552-2340 >> Direct: 937-552-2343 >> 1100 Wayne St >> Suite 1337 >> Troy, OH 45373 >> On Dec 3, 2015 12:42 PM, "Josh Baird" <[email protected]> wrote: >> >>> The SyncInjector can take up to ~57V (ignore the label). You will need >>> to power it with 48V to power the 450i. >>> >>> There are problems with cable distance on SyncInjectors prior to H1 (I >>> beileve). Depending on your cable distance, you may or may not see an >>> issue from what I understand. >>> >>> Josh >>> >>> On Thu, Dec 3, 2015 at 12:41 PM, Sam Lambie <[email protected]> >>> wrote: >>> >>>> After looking at some of the earlier posts, I can't really determine if >>>> I can use the 450i AP on a gigabit syncinjector. It appears that it want a >>>> 48vdc power supply. What is the best way to set this up? Or will it >>>> actually accept the 29 vdc power supply on the SyncInjector? >>>> >>>> Sam >>>> >>>> -- >>>> -- >>>> *Sam Lambie* >>>> Taosnet Wireless Tech. >>>> 575-758-7598 Office >>>> www.Taosnet.com <http://www.newmex.com> >>>> >>> >>> > > > -- > -- > *Sam Lambie* > Taosnet Wireless Tech. > 575-758-7598 Office > www.Taosnet.com <http://www.newmex.com> > -- -- *Sam Lambie* Taosnet Wireless Tech. 575-758-7598 Office www.Taosnet.com <http://www.newmex.com>
