Hell even running Cat5 cable in some parts of Southern NM requires licensed electrician On Dec 11, 2015 10:42 AM, "That One Guy /sarcasm" <[email protected]> wrote:
> Yeah, thats the problem I run into at elevators, they dont go by code. > Panels with 110 on one phase, 65 on another. I assume its caused by tying a > sub panel into a 3phase with a problematic motor > > Most of them have approved us doing the work. the 1200 dollar bill for an > electrician to run a 120 foot conduit circuit is what pushed this > > On Fri, Dec 11, 2015 at 11:28 AM, George Skorup <[email protected]> wrote: > >> For the bigger outfits, we don't want the liability, so we pay their >> electrician. And usually everything has to be in rigid or aluminum. For the >> smaller guys, we ask how they want it done. Most of the time they don't >> care, so we just do it and follow code. You have to keep in mind that >> you're going to run into lots of 3-phase, possible weird configurations and >> sub panels all over the place. >> >> >> On 12/11/2015 11:15 AM, That One Guy /sarcasm wrote: >> >> Without getting into the licensing details >> Im getting more freedom to touch the service side at our sites >> Im a really handy home wiring guy, overly cautious >> >> In illinois or online, does anybody know of a basic competency program >> for electrical? If I was going to do a full training, id tell my boss to >> punch sand and go be a union electrician, so im not looking at that. >> >> Liability may not allow for a program like this to exist, I just dont >> want to blow a grain elevator up because I didnt know something (not overly >> concerned considering some of the wiring at the elevators we operate at) >> >> -- >> If you only see yourself as part of the team but you don't see your team >> as part of yourself you have already failed as part of the team. >> >> >> > > > -- > If you only see yourself as part of the team but you don't see your team > as part of yourself you have already failed as part of the team. >
