There are known issues that have been resolved and still what appear to be unknown issues that are not understood or resolved. We are actively working with Cambium on it. We have 2.6.1RC8, which fixes the known issues, but we are still having issues, which they are actively investigating.
The issues are RADIUS-specific. We changed one AP and all SMs to Open and the sessions stayed up, but going back to RADIUS causes sessions to drop again. Dave On Feb 12, 2016, at 12:20 PM, Josh Luthman <[email protected]<mailto:[email protected]>> wrote: I haven't had any problems between 2.4.3 and 2.6 as far as *wireless* registration association. Since you're specifying you use radius, are you talking about the PPPOE session? Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Fri, Feb 12, 2016 at 12:18 PM, Gilbert T. Gutierrez, Jr. <[email protected]<mailto:[email protected]>> wrote: I have an issue that some of you may have experienced and I was hoping there was a work around. 1. I use radius 2. All subscriber stations are now running 2.6 3. All access points are running 2.4.3 The issue is that when I update the firmware on the Access Points, the subscriber modules will not hold registration. This activity will continue even after I downgrade back to 2.4.3 on the access points. The registration maxes out just over one minute per subscriber. If I soft or hard reboot the subscriber stations, they will then again hold their registration. Is there a work around for this? I am assuming this is an issue with the 2.6 software on the subscribers. Has anyone else experienced this same issue? Gilbert
