Oh my gosh Jamie! First off, not only is that photo completely in focus but there’s no Tecate in it- I doubt it’s yours. Second that thing is the size of a refrigerator! Our enclosures are tower-top mounted, about 1.6ft3. How will you keep that cool? Mini-split!
From: Af [mailto:[email protected]] On Behalf Of Jaime Solorza Sent: Wednesday, April 20, 2016 20:34 To: Animal Farm <[email protected]> Subject: Re: [AFMUG] Enclosure ventilation I will share what we are installing tomorrow..... We are building an outdoor panel with stainless steel enclosure... On Apr 20, 2016 9:28 PM, "Scott Vander Dussen" <[email protected]<mailto:[email protected]>> wrote: Fiberglass enclosure Bud Industries IPV-1116<http://www.alliedelec.com/bud-industries-ipv-1116/70368864/> vents Orion WMG60M<http://www.alliedelec.com/orion-knight-electronics-inc-wmg60m/70103693/> wire filters 60mm DC fan<http://www.rpelectronics.com/cfa246025ms-24vdc-sleeve-bearing-60mm-fan.html> with Locked Rotor Alarm Signal Output 60mm guard<http://www.rpelectronics.com/cfg-60m-60mm-metal-finger-guard.html> The enclosure includes a Site Monitor, I'm hoping to use its secondary DC input to monitor the fan's yellow alarm wire lead and trigger an error state in our SNMP monitoring if a fan becomes locked. I'm concerned about the fans running 24x7 potentially bringing in moisture from fog/nightly humidity. With the site monitor could to turn the fans on/off based upon ambient temperature or time of day? If yes, how would I do that, a relay? What kind of relay? I don't have much experience with relays/Site Monitors, thanks. Or is there some other obvious solution I'm missing? Another idea is to use a Hyderon RG-11 Rain Sensor / Gauge<http://rainsensors.com/how-it-works/> to trigger the fans off for both dark (less than 2000 lux) and/or rain. This seems pretty rad! Thanks, `S
