Oh right, ya, they make a 1115 model<http://www.alliedelec.com/bud-industries-ipv-1115/70368863/> which is designed for 60mm, good eye!
From: Af [mailto:[email protected]] On Behalf Of Eric Kuhnke Sent: Wednesday, April 20, 2016 20:37 To: [email protected] Subject: Re: [AFMUG] Enclosure ventilation by the way the fan you've linked is 60mm, for that particular vent you will want 80mm. I've never seen an outdoor enclosure done with 60mm fans. 80 or 120mm move a lot more air and are much quieter. On Wed, Apr 20, 2016 at 8:28 PM, Scott Vander Dussen <[email protected]<mailto:[email protected]>> wrote: Fiberglass enclosure Bud Industries IPV-1116<http://www.alliedelec.com/bud-industries-ipv-1116/70368864/> vents Orion WMG60M<http://www.alliedelec.com/orion-knight-electronics-inc-wmg60m/70103693/> wire filters 60mm DC fan<http://www.rpelectronics.com/cfa246025ms-24vdc-sleeve-bearing-60mm-fan.html> with Locked Rotor Alarm Signal Output 60mm guard<http://www.rpelectronics.com/cfg-60m-60mm-metal-finger-guard.html> The enclosure includes a Site Monitor, I'm hoping to use its secondary DC input to monitor the fan's yellow alarm wire lead and trigger an error state in our SNMP monitoring if a fan becomes locked. I'm concerned about the fans running 24x7 potentially bringing in moisture from fog/nightly humidity. With the site monitor could to turn the fans on/off based upon ambient temperature or time of day? If yes, how would I do that, a relay? What kind of relay? I don't have much experience with relays/Site Monitors, thanks. Or is there some other obvious solution I'm missing? Another idea is to use a Hyderon RG-11 Rain Sensor / Gauge<http://rainsensors.com/how-it-works/> to trigger the fans off for both dark (less than 2000 lux) and/or rain. This seems pretty rad! Thanks, `S
