Nope. That happened in Borger...Vernon hit a barrier when we slide in snow and ice in January...I don't drive and drink....drink at home 99% of the time. On Apr 20, 2016 9:49 PM, "Scott Vander Dussen" <[email protected]> wrote:
> Incidentally, was Tecate to blame for the passenger door? > > > > *From:* Af [mailto:[email protected]] *On Behalf Of *Jaime Solorza > *Sent:* Wednesday, April 20, 2016 20:34 > *To:* Animal Farm <[email protected]> > *Subject:* Re: [AFMUG] Enclosure ventilation > > > > I will share what we are installing tomorrow..... We are building an > outdoor panel with stainless steel enclosure... > > On Apr 20, 2016 9:28 PM, "Scott Vander Dussen" <[email protected]> > wrote: > > Fiberglass enclosure > Bud Industries IPV-1116< > http://www.alliedelec.com/bud-industries-ipv-1116/70368864/> vents > Orion WMG60M< > http://www.alliedelec.com/orion-knight-electronics-inc-wmg60m/70103693/> > wire filters > 60mm DC fan< > http://www.rpelectronics.com/cfa246025ms-24vdc-sleeve-bearing-60mm-fan.html> > with Locked Rotor Alarm Signal Output > 60mm guard< > http://www.rpelectronics.com/cfg-60m-60mm-metal-finger-guard.html> > > The enclosure includes a Site Monitor, I'm hoping to use its secondary DC > input to monitor the fan's yellow alarm wire lead and trigger an error > state in our SNMP monitoring if a fan becomes locked. > > I'm concerned about the fans running 24x7 potentially bringing in moisture > from fog/nightly humidity. With the site monitor could to turn the fans > on/off based upon ambient temperature or time of day? If yes, how would I > do that, a relay? What kind of relay? I don't have much experience with > relays/Site Monitors, thanks. Or is there some other obvious solution I'm > missing? > > Another idea is to use a Hyderon RG-11 Rain Sensor / Gauge< > http://rainsensors.com/how-it-works/> to trigger the fans off for both > dark (less than 2000 lux) and/or rain. This seems pretty rad! > > Thanks, > `S > >
