Has the issue with sync-injector standard sync -> GIGE-APC-HV -> 250ft cat-5 -> PMP450i and gigabit ethernet link been fixed somehow? I have some PTP450i's I need bit more then 100mbps on.
On Mon, Jan 30, 2017 at 10:40 AM, Forrest Christian (List Account) <[email protected]> wrote: > > Cambium sync is going to happen... but I didn't want to hold this injector > any longer. > > My choice was to ship a functional, solid, working injector now which does > everything but cambium sync, or hold it for a few more months. At some point > I just have to ship something, instead of waiting until some fictional future > point where there aren't any additional features to be added. > > The advantage here is that the controller and enclosure will remain the same. > Customers who want cambium sync can wait a bit more, or can buy the system > as it is and swap out boards as needed down the road. > > The other driving factor is that Cambium sync will be increasing the sale > price by at least $10 and maybe as much as $20 per port. This means that > there is a good chance that a fully loaded cambium sync rackinjector will > cost around $250 more than the non-cambium sync version. For those people > who don't need cambium sync, this is a big jump for a feature they don't > need, so I'll be selling both versions. > > -forrest > > On Mon, Jan 30, 2017 at 9:17 AM, Ken Hohhof <[email protected]> wrote: >> >> New installations will be biased toward new APs, so Cambium sync may be a >> critical feature. >> >> >> >> >> >> From: Af [mailto:[email protected]] On Behalf Of Forrest Christian (List >> Account) >> Sent: Monday, January 30, 2017 9:30 AM >> To: af <[email protected]> >> Subject: Re: [AFMUG] PacketFlux Rackmount Injector Update >> >> >> >> Yes. Currently there is only one board type for the slots... You will be >> able to order it with any number of slots filled - the rest will have blanks >> put in place. It is designed so end users can add, remove or swap each >> board. >> >> >> >> The current board is essentially our current powerinjector+sync in that form >> factor - 4 ports, each jumperable for any gigabit-compatible power scheme, >> and each jumperable to select one of the three voltage input sources. >> >> >> >> There are two additional board types on the drawing board. The one most >> interesting to my existing customers will add support for cambium sync which >> is compatible with the 450i and 450m. >> >> >> >> >> >> >> >> On Mon, Jan 30, 2017 at 8:12 AM, That One Guy /sarcasm >> <[email protected]> wrote: >> >> is this mix and match for the 4 slots? >> >> >> >> On Mon, Jan 30, 2017 at 8:35 AM, Forrest Christian (List Account) >> <[email protected]> wrote: >> >> For those eagerly waiting for the RackMount Injector.... >> >> >> >> The engineering validations I mentioned before have been completed. I >> discovered one minor board error, which has been corrected. I also took >> advantage of the additional board revision to make another minor circuit >> revision which will improve performance. At this point, what we hope are >> the final verification boards are on order. Because of how minor the >> revision was to the boards, we have decided to go ahead and release this to >> part purchasing - which basically means we're buying everything we need to >> actually build these. We should be able to validate the final board >> revision and have actual production boards here before all of the other >> parts arrive. This will also give us a chance to modify the circuit board >> if we discover a parts availability issue during the purchasing process. >> >> >> We've issued almost all of the purchase orders for parts for the first >> production run - we're now waiting for final confirmation of delivery dates. >> I expect these this week, with the caveat that in a couple of cases >> we're dealing with the non-joys of trying to get things done during China's >> spring festival holiday. At least one vendor is shut down completely until >> the 3rd, and I'm sure there will be a bit of backlog when everyone returns >> to work. >> >> Once I have confirmed orders with estimated ship dates and validated pricing >> for almost everything, I'll get the unit up on the website to do pre-orders >> with a semi-definite ship date. At this point, I'm guessing either just >> before or just after WISPAMERICA. We're hoping for just before since I >> would much rather tell people that the product is shipping than explain why >> it isn't. But the reality is that there isn't much time before WISPAMERICA >> so I'm guessing I'll be explaining. >> >> One more teaser image is attached. >> >> >> -- >> >> Forrest Christian CEO, PacketFlux Technologies, Inc. >> >> Tel: 406-449-3345 | Address: 3577 Countryside Road, Helena, MT 59602 >> >> [email protected] | http://www.packetflux.com >> >> >> >> >> >> >> >> -- >> >> If you only see yourself as part of the team but you don't see your team as >> part of yourself you have already failed as part of the team. >> >> >> >> >> >> -- >> >> Forrest Christian CEO, PacketFlux Technologies, Inc. >> >> Tel: 406-449-3345 | Address: 3577 Countryside Road, Helena, MT 59602 >> >> [email protected] | http://www.packetflux.com >> >> > > > > > -- > Forrest Christian CEO, PacketFlux Technologies, Inc. > Tel: 406-449-3345 | Address: 3577 Countryside Road, Helena, MT 59602 > [email protected] | http://www.packetflux.com > >
