If that what it takes... almost all of my products have come from either something I needed or something someone like Josh needed. If I just invent something and I think perhaps folks will buy it, those are almost always dogs.
From: Mitch Koep Sent: Sunday, March 26, 2017 9:25 AM To: [email protected] Subject: Re: [AFMUG] Fw: Netonix LOL Nice way to order a vendor Josh Mitch On 03/26/2017 10:20 AM, Josh Luthman wrote: Please make it one size fits all. Like the gigE HV. I'm not stocking 3 products for 1 job. Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Sat, Mar 25, 2017 at 8:58 PM, Chuck McCown <[email protected]> wrote: Peddling my bike as fast as I can go. I think it will be a no case product. Two shielded RJ45s, PCB. 8 LEDS. 4 on one side of the fuses, 4 on the other so you can see if any of the fuses have blown. Bare PCB design. Perhaps painted with the LEDS showing through the paint. I think I can fit it all in a 2 inch PCB. Short shielded CAT5 jumper. From: Mitch Koep Sent: Saturday, March 25, 2017 3:14 PM To: [email protected] Subject: Re: [AFMUG] Fw: Netonix Look forward to getting some when your ready Mitch On 03/25/2017 09:20 AM, Chuck McCown wrote: That is exactly what it is. Universal for all POE products. From: Faisal Imtiaz Sent: Saturday, March 25, 2017 8:16 AM To: [email protected] Subject: Re: [AFMUG] Fw: Netonix >> The external in line fuse product is ready for prototyping. Let us know how this goes, if the test are successful, I would suggest making an 'external in-line fuse', which would make for a quick retrofit for existing modules out there . Thanks. Faisal Imtiaz Snappy Internet & Telecom 7266 SW 48 Street Miami, FL 33155 Tel: 305 663 5518 x 232 Help-desk: (305)663-5518 Option 2 or Email: [email protected] -------------------------------------------------------------------------- From: "Chuck McCown" mailto:[email protected] To: [email protected] Sent: Saturday, March 25, 2017 9:38:12 AM Subject: Re: [AFMUG] Fw: Netonix I would not put any surge protection on Netonix period, top or bottom. If it is POE and powered by a passive source you run a risk of smoking it with any surge suppressor. I have two devices designed, one is an ancillary fuse to put inline with Netonix. The second is adding fusing to my surge protectors if I can fit it in. The external in line fuse product is ready for prototyping. From: David Coudron Sent: Saturday, March 25, 2017 7:35 AM To: [email protected] Subject: Re: [AFMUG] Fw: Netonix We are also very interested in this topic. We will be building out 10 new towers in the next few months, and will be making the change to Netonix switches (we had previously used a different type of switch). I the past we had put Transtector surge protectors on the tower top and in the cabinet on the ground. From what you are saying in thread, we should not plan on surge protectors in the cabinet, but what is the recommended change for the tower top, if any? Thanks, David Coudron [email protected] | Mobile: 612-991-7474 Advantenon, Inc. [email protected] | 3500 Vicksburg Lane N, Suite 315, Plymouth, MN 55447 | www.advantenon.com | Phone: 800-704-4720 | Local: 612-454-1545 From: Af [mailto:[email protected]] On Behalf Of Chuck McCown Sent: Saturday, March 25, 2017 8:29 AM To: [email protected] Subject: Re: [AFMUG] Fw: Netonix If an impulse comes along and the surge suppressor clamps to ground, you run the risk of smoking the Netonix POE transformer. It will not protect itself against shorts. From: Josh Baird Sent: Saturday, March 25, 2017 7:23 AM To: [email protected] Subject: Re: [AFMUG] Fw: Netonix What exactly is the reason? We always run through your surge protectors before connecting to Netonix. On Mar 25, 2017, at 9:15 AM, Chuck McCown <[email protected]> wrote: Bypass ALL surge suppressors that are connected to Netonix, irrespective of manufacturer. From: [email protected] Sent: Saturday, March 25, 2017 5:41 AM To: [email protected] Subject: Re: [AFMUG] Fw: Netonix So we should now bypass all our APC-type surge suppressors that are connected to Netonix? On Fri, Mar 24, 2017 at 11:26 PM, Chuck McCown <[email protected]> wrote: I am going to fix this little problem... Netonix will fix your port for something like $25 From: Bill Prince Sent: Friday, March 24, 2017 8:56 PM To: [email protected] Subject: Re: [AFMUG] Fw: Netonix Yeah. We accidentally hooked up an AF24 through a Cambium surge suppressor, and it fragged the port on the Netonix. We were swapping from something else that had been on the cable, and completely forgot that it was going through that surge suppressor. Hard lesson learned. bp<part15sbs{at}gmail{dot}com> On 3/24/2017 1:27 PM, Chuck McCown wrote: OK, had an exchange with Netonix today. It is just as Matt Hoppes said. You short out their POE and it will blow the Ethernet transformer. I really presumed they had circuitry like Forrest that could detect and shut down in an over current situation. They do have poly fuses which are slow to react and may protect it from a very brief short, but longer shorts will indeed harm the port feeding the transformer. So, Netonix is not active POE. I would say that on passive POE a plain surge suppressor should not be used. I am working some “non plain” surge suppressors now.... ;-) Stay tuned to this bat channel and a big thanks to Matt for forcing me to learn something new. It was painful, but I can do painful things when I have to. From: Chuck McCown Sent: Friday, March 24, 2017 10:01 AM To: [email protected] Subject: Re: [AFMUG] Netonix tnx From: Josh Luthman Sent: Friday, March 24, 2017 9:47 AM To: [email protected] Subject: Re: [AFMUG] Netonix chris.sisler ( A ) netlinx.net Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Fri, Mar 24, 2017 at 11:45 AM, Chuck McCown <[email protected]> wrote: Anyone know the email for the guy that runs Netonix? -- Mitch Koep A Better Wireless 218-851-8689 cell -- Mitch Koep A Better Wireless 218-851-8689 cell
