IBM 5250 emulation Novell cards in IBM XT PC over WaveLAN 900 MHz link for Cal TV...3 miles .. July 1992...
On May 23, 2017 8:31 AM, "Dustin Jurman" <[email protected]> wrote: > Better hit the mark on that thicknet with a Vampire Tap or you’ll get some > reflections. Since you said Vampire Tap I’m going to counter with NE2000. > > > > DSJ > > > > *From:* Af [mailto:[email protected]] *On Behalf Of *Chuck McCown > *Sent:* Tuesday, May 23, 2017 10:22 AM > *To:* [email protected] > *Subject:* Re: [AFMUG] Ethernet over coax > > > > Vampire tap. > > > > *From:* Dustin Jurman > > *Sent:* Tuesday, May 23, 2017 8:21 AM > > *To:* [email protected] > > *Subject:* Re: [AFMUG] Ethernet over coax > > > > Those were the good old days when the only tools you needed was a t > connector and a 50 ohm terminator. J > > > > DSJ > > > > *From:* Af [mailto:[email protected] <[email protected]>] *On > Behalf Of *Ron M. > *Sent:* Tuesday, May 23, 2017 10:11 AM > *To:* [email protected] > *Subject:* Re: [AFMUG] Ethernet over coax > > > > https://en.wikipedia.org/wiki/10BASE2 > > Been there, done that? > > > > On Mon, May 22, 2017 at 3:42 PM, Harold Bledsoe <[email protected]> > wrote: > > Hi folks, > > > > It's that time again - looking for brave, er I mean beta users for an > ethernet over coax system. The same one could be used for phone line later. > > > > The protocol is based on g.hn so it can support PTMP on the system. > > > > Please shoot me a note offlist and I'll get you added. > > > > Thanks, > > -Hal > > >
