I've ordered a few of these to play with. They seem pretty comparable and a lot more proven, but I don't know if they'll work with the UBNT OLT.
http://www.fs.com/products/35020.html I guess I'll see if they work soon enough. Thank you, Brett A Mansfield > On Jul 31, 2017, at 2:54 PM, Sterling Jacobson <[email protected]> wrote: > > Yeah, I guessed there would be an early adopters pain curve like with > anything UBNT. > > I just got on their online 'test' system and noticed most of their CPE on > reports are on 'high failure' for about two weeks on their demo, lol! > > I hope that's not real data they are mirroring/using. > > -----Original Message----- > From: Af [mailto:[email protected]] On Behalf Of Brett A Mansfield > Sent: Monday, July 31, 2017 2:47 PM > To: [email protected] > Subject: Re: [AFMUG] UBNT OLT Transition from Active Ethernet to GPON > > I have heard a lot of complaints from DirectCom customers about their Fiber > never being close to what they pay for, but that may be more related to the > way it's throttled then the GPON. > > I've been playing with several of these ONT/OLT over the past week. I really > like them. Though I have a 50% failure rate on the nanoG's. The fiber port > breaks very easily. > > Thank you, > Brett A Mansfield > >> On Jul 31, 2017, at 2:31 PM, <[email protected]> <[email protected]> wrote: >> >> We have good luck with 32 customers per 2.4 Gbps down on GPON. Lotsa >> overhead. No problems, not even close, so far. And we are selling more Gig >> circuits than ever before. >> >> -----Original Message----- From: Sterling Jacobson >> Sent: Monday, July 31, 2017 2:19 PM >> To: '[email protected]' >> Subject: [AFMUG] UBNT OLT Transition from Active Ethernet to GPON >> >> Anyone tried their PON OLT CPE and OLT 8 port (128 clients per port) 1U unit? >> >> I see pricing around $70 retail for OLT, but haven't seen pricing yet for >> the OLT 1U unit. >> >> Also, I'm active fiber right now, so I have full 1 to 1 panels in the rack >> already. >> >> If I wanted to 'migrate' to OLT from active I would need some sort of >> transition panel/setup right? >> >> Right now my density is 48 ports per 1U 1 to 1 single family home >> connections. >> >> The UBNT Fiber OLT has 8 ports handling up to 128 clients each, with 20Gbps >> uplink capability (not quite sure on those split details yet). >> >> I currently only take a max of 576 per cabinet on active, so I could easily >> use just one of these UBNT fiber OLT units. >> If I don't care about the share ratio I guess, I would just get another 576 >> panel count that spliced 72 count to each port and I'm done. >> >> I'm unclear what that panel/splice would look like though since I've never >> actually done GPON. >> >> And I would probably want to not load up that many per port, and instead >> maybe get four of the UBNT Fiber OLT units. >> That would take up 4U of rack space, the fanout would probably still take up >> 4U of rack space, for a total of 8 U. >> And I would have instead an 18 customer to 1 port on the GPON instead of 72 >> which I like better for future use. >> >> Do these UFiber OLT 1U rackmount units share just 1Gbps per each of the 8 >> ports? That would only be 8Gbps needed total. >> So I assume the GPON spec they are using can transmit more than that per >> each of the 8 GPON ports, right?
