Yeah, but it is decimal coordinates. I discovered if you click a placemark in
GE then decimal coordinates will come up that can be cut and pasted into UBNT.
But after going through all that, I really didn’t see where it was better than
RM and actually RM is better than airlink in some respects.
From: Josh Reynolds
Sent: Thursday, August 17, 2017 8:12 AM
To: af@afmug.com
Subject: Re: [AFMUG] AF-11x
Look under the selected radios on the right side. There are GPS coordinates
boxes right below height and EIRP that say "AP Location" and "Station Location".
On Aug 17, 2017 8:47 AM, "Chuck McCown" <ch...@wbmfg.com> wrote:
Is there an easy way to drop a location from Google Earth or RM into airlink?
From: Josh Reynolds
Sent: Tuesday, August 15, 2017 1:00 PM
To: af@afmug.com
Subject: Re: [AFMUG] AF-11x
airlink.ubnt.com
Click on "AirFiber fx" line on the right side in the middle, then 11 GHz.
Rest is self explanatory.
On Aug 15, 2017 1:59 PM, "Chuck McCown" <ch...@wbmfg.com> wrote:
Link does not work.
From: Josh Reynolds
Sent: Tuesday, August 15, 2017 12:56 PM
To: af@afmug.com
Subject: Re: [AFMUG] AF-11x
https://airline.ubnt.com is pretty damn good these days. Should help you
figure out what you need easily.
It does require you to log in with your account.
On Aug 15, 2017 1:34 PM, "Chuck McCown" <ch...@wbmfg.com> wrote:
What is a common channel BW? 40 MHz? I suppose it depends on
congestion. I only need about 250 Mbps so lower order modulation may be
desirable and perhaps narrower channels too.
From: Jeremy
Sent: Tuesday, August 15, 2017 10:54 AM
To: af@afmug.com
Subject: Re: [AFMUG] AF-11x
Of course, the exact configuration is based on your license and which
frequencies it is supposed to operate on. The above configuration is just an
example.
On Tue, Aug 15, 2017 at 10:53 AM, Jeremy <jeremysmi...@gmail.com> wrote:
They are like that, but 3x bigger. On top, the lid comes off and the
duplexers go beneath the cover. If your link is 'High' then you will want
'High' duplexers for both sides of the link (x4 total - two extra to purchase)
- they will go in a configuration like 1-3-3-1 on one side and 3-1-1-3 on the
other side.
On Tue, Aug 15, 2017 at 10:11 AM, Mathew Howard <mhoward...@gmail.com>
wrote:
They come with 1 duplexer (setup for SISO) - you need to buy the
second one separately to do MIMO. You do need to figure out what frequencies
you're going to be using before you buy the radios, since there are two
different duplexers, depending on which half of the band you're in.
You need one frequency pair on both polarities (for MIMO).
On Tue, Aug 15, 2017 at 10:52 AM, Chuck McCown <ch...@wbmfg.com>
wrote:
Do they all come with two N connectors or do you have to pay more
for duplexers? Not quite sure how to buy or license. I guess you have to have
two pairs of frequencies? Or at the very least, both polarizations on the same
frequency?
Trying to collect some budgetary estimates on what my project is
going to cost.
