Artesia area.. I installed bunch on Siklu links along with a few 3.65
Ubiquiti radios....

Jaime Solorza

On Feb 23, 2018 11:11 AM, "Lewis Bergman" <lewis.berg...@gmail.com> wrote:

> I bet he won't have any issues with frequencies where he is.
>
> On Fri, Feb 23, 2018 at 12:04 PM Faisal Imtiaz <fai...@snappytelecom.net>
> wrote:
>
>> so.. here is how things will break down for you ....
>>
>> to do 1G duplex links, you have a few choices..
>>                 60ghz or 80ghz  (very short links)
>>                 or you do 24ghz (short to medium, depending on rain fade)
>>                 11ghz or 6ghz.. you need to have freq available, and will
>> be looking at roughly $15k / link
>>                              ( the pricing on 1G links in the range of
>> $12k to $15k may change in depending on pricing announcement by
>> Bridgewave's new radios).
>>
>> Now if the requirements were say sub 1G  (500meg to 800meg) then you have
>> a few more options
>>         which can be in the range of $3k to $7k  per link
>>
>> Bigger challenge will be finding enough licensed spectrum to do what is
>> needed.
>>
>> Best of luck.
>>
>> Regards.
>>
>> Faisal Imtiaz
>> Snappy Internet & Telecom
>> http://www.snappytelecom.net
>>
>> Tel: 305 663 5518 x 232 <(305)%20663-5518>
>>
>> Help-desk: (305)663-5518 <(305)%20663-5518> Option 2 or Email:
>> supp...@snappytelecom.net
>>
>> ------------------------------
>>
>> *From: *"Jaime Solorza" <losguyswirel...@gmail.com>
>> *To: *"Animal Farm" <af@afmug.com>
>> *Sent: *Friday, February 23, 2018 12:49:31 PM
>> *Subject: *Re: [AFMUG] Question for the collective...
>>
>> Not familiar with this product....will download specs
>>
>> Jaime Solorza
>>
>> On Feb 23, 2018 9:56 AM, "Dave" <dmilho...@wletc.com> wrote:
>>
>>> Bang it out with PTP820C ring
>>> Most of the switching is now for doing such a thing is built right into
>>> the ODU if you go all outdoor.
>>> They do make a split unit or an all indoor unit as well.
>>>
>>>
>>>
>>> On 02/23/2018 10:30 AM, Jaime Solorza wrote:
>>>
>>> That is what I was thinking...4 P2P links and tie them in at office...I
>>> wonder if you could colocate 4 11GHz links successfully?
>>>
>>> Jaime Solorza
>>>
>>> On Feb 23, 2018 9:07 AM, "Lewis Bergman" <lewis.berg...@gmail.com>
>>> wrote:
>>>
>>>> If budget isn't a problem, I would put up P2P to every location in a
>>>> ring topology. A little routing or switch magic (your preference) and you
>>>> have a redundant setup.
>>>>
>>>> On Fri, Feb 23, 2018 at 10:03 AM Jeremy <jeremysmi...@gmail.com> wrote:
>>>>
>>>>> I would assume that you can add a fourth location...
>>>>>
>>>>> On Fri, Feb 23, 2018 at 9:00 AM, Jeremy <jeremysmi...@gmail.com>
>>>>> wrote:
>>>>>
>>>>>> CL has an option called Fiber Plus that will give them a gig at three
>>>>>> locations.  ISPs are not eligible, as it no longer allows resale.  If 
>>>>>> they
>>>>>> can get that deal, it would be your best bet.  They tie everything 
>>>>>> together
>>>>>> on a VLAN.
>>>>>>
>>>>> On Fri, Feb 23, 2018 at 8:33 AM, Jaime Solorza <
>>>>>> losguyswirel...@gmail.com> wrote:
>>>>>>
>>>>>>> Going to have a meeting with company that has a 1GBps feed to office
>>>>>>> from CenturyLink.   They have four remote locations (4.1, 4.4, 6.2 and 
>>>>>>> 9.1
>>>>>>> miles ) from office.   All are west and with a 60 degree span if I was
>>>>>>> using a sectored antenna.  On email, they indicated they want licensed
>>>>>>> links and want to deliver 1GBps to each location. Not sure if they are
>>>>>>> adding more CenturyLink feeds to provide 1Gig to each site.  I wonder 
>>>>>>> what
>>>>>>> you guys would recommend?  I know it's a energy company and Pecan farm
>>>>>>> outfit in eastern  NM.  Let's say they have good budget , dazzle me with
>>>>>>> your suggestions?
>>>>>>>
>>>>>>> Jaime Solorza
>>>>>>>
>>>>>>
>>> --
>>>
>>

Reply via email to