Two years ago

Jaime Solorza

On Feb 23, 2018 4:28 PM, "Jaime Solorza" <losguyswirel...@gmail.com> wrote:

> Artesia area.. I installed bunch on Siklu links along with a few 3.65
> Ubiquiti radios....
>
> Jaime Solorza
>
> On Feb 23, 2018 11:11 AM, "Lewis Bergman" <lewis.berg...@gmail.com> wrote:
>
>> I bet he won't have any issues with frequencies where he is.
>>
>> On Fri, Feb 23, 2018 at 12:04 PM Faisal Imtiaz <fai...@snappytelecom.net>
>> wrote:
>>
>>> so.. here is how things will break down for you ....
>>>
>>> to do 1G duplex links, you have a few choices..
>>>                 60ghz or 80ghz  (very short links)
>>>                 or you do 24ghz (short to medium, depending on rain fade)
>>>                 11ghz or 6ghz.. you need to have freq available, and
>>> will be looking at roughly $15k / link
>>>                              ( the pricing on 1G links in the range of
>>> $12k to $15k may change in depending on pricing announcement by
>>> Bridgewave's new radios).
>>>
>>> Now if the requirements were say sub 1G  (500meg to 800meg) then you
>>> have a few more options
>>>         which can be in the range of $3k to $7k  per link
>>>
>>> Bigger challenge will be finding enough licensed spectrum to do what is
>>> needed.
>>>
>>> Best of luck.
>>>
>>> Regards.
>>>
>>> Faisal Imtiaz
>>> Snappy Internet & Telecom
>>> http://www.snappytelecom.net
>>>
>>> Tel: 305 663 5518 x 232 <(305)%20663-5518>
>>>
>>> Help-desk: (305)663-5518 <(305)%20663-5518> Option 2 or Email:
>>> supp...@snappytelecom.net
>>>
>>> ------------------------------
>>>
>>> *From: *"Jaime Solorza" <losguyswirel...@gmail.com>
>>> *To: *"Animal Farm" <af@afmug.com>
>>> *Sent: *Friday, February 23, 2018 12:49:31 PM
>>> *Subject: *Re: [AFMUG] Question for the collective...
>>>
>>> Not familiar with this product....will download specs
>>>
>>> Jaime Solorza
>>>
>>> On Feb 23, 2018 9:56 AM, "Dave" <dmilho...@wletc.com> wrote:
>>>
>>>> Bang it out with PTP820C ring
>>>> Most of the switching is now for doing such a thing is built right into
>>>> the ODU if you go all outdoor.
>>>> They do make a split unit or an all indoor unit as well.
>>>>
>>>>
>>>>
>>>> On 02/23/2018 10:30 AM, Jaime Solorza wrote:
>>>>
>>>> That is what I was thinking...4 P2P links and tie them in at office...I
>>>> wonder if you could colocate 4 11GHz links successfully?
>>>>
>>>> Jaime Solorza
>>>>
>>>> On Feb 23, 2018 9:07 AM, "Lewis Bergman" <lewis.berg...@gmail.com>
>>>> wrote:
>>>>
>>>>> If budget isn't a problem, I would put up P2P to every location in a
>>>>> ring topology. A little routing or switch magic (your preference) and you
>>>>> have a redundant setup.
>>>>>
>>>>> On Fri, Feb 23, 2018 at 10:03 AM Jeremy <jeremysmi...@gmail.com>
>>>>> wrote:
>>>>>
>>>>>> I would assume that you can add a fourth location...
>>>>>>
>>>>>> On Fri, Feb 23, 2018 at 9:00 AM, Jeremy <jeremysmi...@gmail.com>
>>>>>> wrote:
>>>>>>
>>>>>>> CL has an option called Fiber Plus that will give them a gig at
>>>>>>> three locations.  ISPs are not eligible, as it no longer allows resale. 
>>>>>>>  If
>>>>>>> they can get that deal, it would be your best bet.  They tie everything
>>>>>>> together on a VLAN.
>>>>>>>
>>>>>> On Fri, Feb 23, 2018 at 8:33 AM, Jaime Solorza <
>>>>>>> losguyswirel...@gmail.com> wrote:
>>>>>>>
>>>>>>>> Going to have a meeting with company that has a 1GBps feed to
>>>>>>>> office from CenturyLink.   They have four remote locations (4.1, 4.4, 
>>>>>>>> 6.2
>>>>>>>> and 9.1 miles ) from office.   All are west and with a 60 degree span 
>>>>>>>> if I
>>>>>>>> was using a sectored antenna.  On email, they indicated they want 
>>>>>>>> licensed
>>>>>>>> links and want to deliver 1GBps to each location. Not sure if they are
>>>>>>>> adding more CenturyLink feeds to provide 1Gig to each site.  I wonder 
>>>>>>>> what
>>>>>>>> you guys would recommend?  I know it's a energy company and Pecan farm
>>>>>>>> outfit in eastern  NM.  Let's say they have good budget , dazzle me 
>>>>>>>> with
>>>>>>>> your suggestions?
>>>>>>>>
>>>>>>>> Jaime Solorza
>>>>>>>>
>>>>>>>
>>>> --
>>>>
>>>

Reply via email to