Search for splice closure instead of splice case. Problem I think is these ship from China so either slow boat shipping and waiting 2 months or very expensive shipping.
> I see trays but not enclosures. > > Link? > > From: Erich Kaiser > Sent: Sunday, March 11, 2018 4:54 PM > To: af@afmug.com > Subject: Re: [AFMUG] Splice Cases > > They do have one for 144 count fiber on their website, looks to be about > $44 > > Erich Kaiser > > North Central Tower > er...@northcentraltower.com > Office: 815-570-3101 > > > > > > On Sun, Mar 11, 2018 at 5:26 PM, Chuck McCown <ch...@wbmfg.com> wrote: > > Is there any FS type lower cost splice cases out in the world yet? > > I say FS type because everything Fiber Store does is 20% the cost of > everyone else. > > Hoping for something lower cost. Not really an area you want to cut > corners on, but they sure are expensive. Say you feed 144 strands in > and out of a typical splice case that has a port that will take 6 drops. > You will be paying $120-$240 for something like that. $20 to $40 per > drop just for the splice case. > Add in an equal amount for the hand hole, you could be in $80 per > customer before electronics just to make the splice. >