DTC6 is cheaper then the Optima-S  We get them for ~$90 without pigtails.

On Mon, Mar 12, 2018 at 10:41 AM, Adam Moffett <dmmoff...@gmail.com> wrote:

> For drop termination I'm really eyeballing the Multilink Optima-S, but I
> haven't deployed any yet.  With 4 ports it's around $135, so it does not
> fit the lower price you're looking for.  It has an upper and lower
> compartment: splice trays in the lower compartment, female terminations in
> the upper compartment.  The idea is during construction you run a few
> pigtails from the lower to upper compartment....one for each house you
> might hook up.  If you're doing PON you could stash a splitter in the lower
> compartment as well.
>
> The installer then just does a field termination and plugs it in.  My hope
> would be that we save time from setting up and tearing down the splicer,
> taking the enclosure off the pole, putting it back up, and retying the
> slack.  We're also not splicing in a bucket or having a cable puller guy
> monkeying with splice trays with 144 other people's service just waiting to
> be tangled up or bent or broken.  I would like to pay less, but I'm
> focusing on saving time and avoiding costly error.
>
>
>
> ------ Original Message ------
> From: "Chuck McCown" <ch...@wbmfg.com>
> To: af@afmug.com
> Sent: 3/11/2018 6:26:15 PM
> Subject: [AFMUG] Splice Cases
>
> Is there any FS type lower cost splice cases out in the world yet?
>
> I say FS type because everything Fiber Store does is 20% the cost of
> everyone else.
>
> Hoping for something lower cost.  Not really an area you want to cut
> corners on, but they sure are expensive.  Say you feed 144 strands in and
> out of a typical splice case that has a port that will take 6 drops.  You
> will be paying $120-$240 for something like that.  $20 to $40 per drop just
> for the splice case.
> Add in an equal amount for the hand hole, you could be in $80 per customer
> before electronics just to make the splice.
>
>


-- 

Carl Peterson

*PORT NETWORKS*

401 E Pratt St, Ste 2553

Baltimore, MD 21202

(410) 637-3707

Reply via email to