We use the wall anchor pins with Unistrut and then just clamp to the pipe.  
Drill a hole for the pin, tap it down with a washer to expand it and they lock 


From: Af [mailto:af-boun...@afmug.com] On Behalf Of Dave
Sent: Thursday, May 17, 2018 9:57 AM
To: af@afmug.com
Subject: Re: [AFMUG] Attaching pole to Chimney

So long as they dont use pine logs should be ok :)

On 05/15/2018 07:04 PM, ch...@wbmfg.com<mailto:ch...@wbmfg.com> wrote:
Stick a piece of PVC down the chimney and use spray foam to hold it in place.

From: Jason McKemie
Sent: Tuesday, May 15, 2018 5:28 PM
To: af@afmug.com
Subject: Re: [AFMUG] Attaching pole to Chimney

Do the unistrut conduit clamps hold the conduit tightly enough to mount it 
vertically? I thought they were intended for horizontal runs.

On Tuesday, May 15, 2018, Sam Lambie <samtaos...@gmail.com> wrote:
Unistrut, clamps and EMT. Done

On Tue, May 15, 2018 at 2:46 PM, Jason McKemie 
<j.mcke...@veloxinetbroadband.com> wrote:
It's just a wood box covered in vinyl.

On Tue, May 15, 2018 at 3:08 PM, Josh Luthman <j...@imaginenetworksllc.com> 
The chimney has vinyl?  I assume it's brick behind it?

If you have to get it from the local hardware store, go there and see what all 
can work.  I'd probably look for the best tool rather than limit myself to that 
one store, though.

Josh Luthman
Office: 937-552-2340
Direct: 937-552-2343
1100 Wayne 
Troy, OH 

On Tue, May 15, 2018 at 3:07 PM, Jason McKemie 
<j.mcke...@veloxinetbroadband.com> wrote:
Anyone have any advice as to what hardware I can use to attach a 6' section of 
1.5" emt to a chimney? It's the vinyl siding covered type. I was thinking of 
just drilling it and running lags straight through, but a bracket of some type, 
possibly utilizing pipe clamps, would be preferred. I'll need to source it from 
a local hardware store.

Sam Lambie
Taosnet Wireless Tech.
575-758-7598 Office


Reply via email to