I just go to the auto parts store and ask for a starter relay for an early
70's Chrysler.B They come in many shapes and sizes, find one with a mounting
tab that works in your engine compartment.B Wiring is simple.B Mount the
relay and ground it, you only need a 18 gauge wire for a ground.B Remove the
wire going from the ignition switch to the starter solenoid from the starter
solenoid, and connect it to the IGN tab on the relay.B Run a 10 or 12 gauge
(can't remember, 12 gauge is probably fine) wire from the hot post on the
starter/solenoid to the BATT post on the relay.B Run another wire of that
same size from the SOL post on the relay to where the ignition switch wire
used to plug in to the starter solenoid.B bs
--
to be removed from alfa, see http://www.digest.net/bin/digest-subs.cgi
or email "unsubscribe alfa" to [email protected]
