Thanks, Brian. I hate chasing electrons, so keeping it simple is good!
Ben From: Brian Shorey [mailto:[email protected]] Sent: Wednesday, October 22, 2014 7:49 PM To: Ben Ament; [email protected] Subject: Re: [alfa] Spider ignition switch I just go to the auto parts store and ask for a starter relay for an early 70's Chrysler. They come in many shapes and sizes, find one with a mounting tab that works in your engine compartment. Wiring is simple. Mount the relay and ground it, you only need a 18 gauge wire for a ground. Remove the wire going from the ignition switch to the starter solenoid from the starter solenoid, and connect it to the IGN tab on the relay. Run a 10 or 12 gauge (can't remember, 12 gauge is probably fine) wire from the hot post on the starter/solenoid to the BATT post on the relay. Run another wire of that same size from the SOL post on the relay to where the ignition switch wire used to plug in to the starter solenoid. bs protection is active. http://www.avast.com -- to be removed from alfa, see http://www.digest.net/bin/digest-subs.cgi or email "unsubscribe alfa" to [email protected]
