I like your design. But if you are having RFI problems; you may have to put the electronics in separate and shielded bays. I did that with my last rocket. I put my BeeLine in a nosecone bay, to keep it away from the TeleMetrum.
From: altusmetrum [mailto:[email protected]] On Behalf Of Chris Attebery Sent: July 12, 2015 11:43 To: Altus Metrum Subject: [altusmetrum] How long does it normally take to get GPS lock? Hey guys, I finished my altimeter bay integration last night. I fired up the Telemetrum 2.0 by itself and it took 5-10 minutes for it to get GPS lock. I turned it off and then turned on my camera and Missile Works RRC2+ before turning on the Telemetrum on this time I let it sit for 6 minutes and it never found any satellites and never got a lock. I have the camera board shielded but the camera module is unshielded and near the Telemetrum. I've been told that writing to the SD card on the camera produces a lot of noise and can interfere with GPS signals. Any suggestions?
_______________________________________________ altusmetrum mailing list [email protected] http://lists.gag.com/mailman/listinfo/altusmetrum
