2009/4/23 Ben Wheeler <[email protected]>: > Hi All, > Thanks for your replies on the grayscale problem. > > Here's the latest in my saga. So I reflashed with these files: > http://downloads.openmoko.org/distro/unstable/NeoFreerunner/u-boot-gta02v5-1.3.1+gitrb20cc520a22715fe7ff069b36b7dfdbb925a8e5a-r1.bin > http://panicking.kicks-ass.org/download/uImage-v17.bin > http://panicking.kicks-ass.org/download/freerunner-v14.6.jffs2 > > Now when I try to boot, I get the default openmoko screen and it goes no > farther. > > Here's the output when I load NAND uboot and go into usb terminal mode and > type "boot": > NAND read: device 0 offset 0x80000, size 0x200000 > 2097152 bytes read: OK > ## Booting kernel from Legacy Image at 32000000 ... > Image Name: OM GTA02 michael-v2_bd8424582433 > Created: 2009-03-26 18:39:19 UTC > Image Type: ARM Linux Kernel Image (uncompressed) > Data Size: 2099608 Bytes = 2 MB > Load Address: 30008000 > Entry Point: 30008000 > Verifying Checksum ... Bad Data CRC > ERROR: can't get kernel image! > > I tried reflashing and repartitioning my sd card (just to be sure) with no > luck. I must be missing something again? > > Thanks, > Ben > >
Maybe it is pushing the u-boot's 2MB limit? Exactly 2MB = 2097152 Bytes, thus this kernel is above that.... Greg _______________________________________________ android-freerunner mailing list [email protected] http://android.koolu.org/listinfo.cgi/android-freerunner-koolu.org
