Stanislav Brabec (Thu, Mar 27, 2008 at 01:15:18AM +0100): > Marlon Smith wrote: > > I used to have no problem with wpa in anstrom, but the past few versions > > or so seem to have wpa broken. Another problem is that my wifi card needs > > to be re-inserted between 5 and 10 times before hostap will "grab" it and > > try to make a connection. I know the card works fine (connects right away > > in OZ) and wifi works also as long as there is no WPA. Any ideas? > > I have similar problems with my hostap driven card (but it succeeds on > 2nd try in most cases). > > I have tried to debug it, and it seems, that if wpa starts to check for > networks too early after card firing it up, card does not work properly > and does not repeat any results in networks scan.
Unfortunately the WPA problem for c7x0 is still present in Angstrom r13. In my case the card seems to work OK (hostap driver gets loaded as soon as I plug in my Ambicom card), wpa_supplicant scans the available networks and selects the correct one, but it does not complete the authentication phase (and keeps on associating and disconnecting until the card is unplugged). The only message that seems relevant is (from dmesg): ieee80211_crypt_tkip: could not allocate crypto API arc4 The message is still there if I modprobe arc4. Should bugs about the autobuild images be reported in the bugtracker? -- Grigorios Prasinos PhD candidate, Computer Engineering and Informatics Dept., U of Patras, Greece http://prasinos.eu/ PGP/GPG Key fingerprint: CDC7 BA79 3C5D 9520 F9F1 FC56 6B2A 2EEB 0227 C528 _______________________________________________ Angstrom-distro-users mailing list Angstrom-distro-users@linuxtogo.org http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/angstrom-distro-users
