It isn't just WPA, it does the exact same thing with WEP.
Grigorios Prasinos wrote: > Stanislav Brabec (Thu, Mar 27, 2008 at 01:15:18AM +0100): >> Marlon Smith wrote: >>> I used to have no problem with wpa in anstrom, but the past few versions >>> or so seem to have wpa broken. Another problem is that my wifi card needs >>> to be re-inserted between 5 and 10 times before hostap will "grab" it and >>> try to make a connection. I know the card works fine (connects right away >>> in OZ) and wifi works also as long as there is no WPA. Any ideas? >> I have similar problems with my hostap driven card (but it succeeds on >> 2nd try in most cases). >> >> I have tried to debug it, and it seems, that if wpa starts to check for >> networks too early after card firing it up, card does not work properly >> and does not repeat any results in networks scan. > > Unfortunately the WPA problem for c7x0 is still present in Angstrom r13. > In my case the card seems to work OK (hostap driver gets loaded as soon as > I plug in my Ambicom card), wpa_supplicant scans the available networks and > selects the correct one, but it does not complete the authentication phase > (and keeps on associating and disconnecting until the card is unplugged). > > The only message that seems relevant is (from dmesg): > ieee80211_crypt_tkip: could not allocate crypto API arc4 > The message is still there if I modprobe arc4. > > Should bugs about the autobuild images be reported in the bugtracker? > -- Harmon Seaver _______________________________________________ Angstrom-distro-users mailing list Angstrom-distro-users@linuxtogo.org http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/angstrom-distro-users
