Hello all,
On this IBM PS/1, I have sufficient high memory to load EPPPD 
high, but find that when I do, I get the packet driver installed at 
0x60, but cannot connect. I get "undefined IP address", and remain
at OFFLINE, and do not go to TCP/IP. If I do not load EPPPD high,
everything is fine. Here is the mem.txt that works:
------------------------------------------------------------------------------------------------

Modules using memory below 1 MB:

  Name           Total       =   Conventional   +   Upper Memory
  --------  ----------------   ----------------   ----------------
  MSDOS       16,637   (16K)     16,637   (16K)          0    (0K)
  SMARTDRV    29,984   (29K)      2,496    (2K)     27,488   (27K)
  HIMEM        1,120    (1K)      1,120    (1K)          0    (0K)
  EMM386       4,144    (4K)      4,144    (4K)          0    (0K)
  COMMAND      3,776    (4K)      3,776    (4K)          0    (0K)
  COMMAND      3,200    (3K)      3,200    (3K)          0    (0K)
  COMMAND      3,280    (3K)      3,280    (3K)          0    (0K)
  COMMAND      3,184    (3K)      3,184    (3K)          0    (0K)
  EPPPD       70,160   (69K)     70,160   (69K)          0    (0K)
  SETVER         704    (1K)          0    (0K)        704    (1K)
  DMOUSE      17,120   (17K)          0    (0K)     17,120   (17K)
  Free       627,632  (613K)    547,136  (534K)     80,496   (79K)

Memory Summary:

  Type of Memory       Total   =    Used    +    Free
  ----------------  ----------   ----------   ----------
  Conventional         655,360      108,224      547,136
  Upper                125,808       45,312       80,496
  Reserved             393,216      393,216            0
  Extended (XMS)    32,380,048    1,324,176   31,055,872
  ----------------  ----------   ----------   ----------
  Total memory      33,554,432    1,870,928   31,683,504

  Total under 1 MB     781,168      153,536      627,632

  Largest executable program size        477,568   (466K)
  Largest free upper memory block         70,160    (69K)
  MS-DOS is resident in the high memory area.
----------------------------------------------------------------------------------
Here's the part in arachne.cfg where I have EPPPD:
----------------------------------------------------------------------------------
[profile]
Profile 486PC.ACF
Connection @epppd.exe>>PPP.LOG
Hangup @termin.com 0x60>NUL
-----------------------------------------------------------------------------------
If I change it to:
Connection @lh epppd.exe>>PPP.LOG
Then EPPPD is loaded high, but I cannot connect.
-----------------------------------------------------------------------------
Any ideas?
Thanks,
Michael L. Dawley
Pearl, Mississippi 

Reply via email to