On Fri, 26 May 2000, Clarence Verge wrote:
> 1) Remove the "default" possibility for com port base.
> Always specify it exactly.
> 2) Try to do something to change the order in which Miniterm writes these
> parameters to PPPDRC.cfg. Write the Base address before the port number
> - or REMOVE the port number.
>
> Apparantly EPPPD will work correctly with only the base address, and maybe
> it will use that if it finds it first. It has a problem if it finds a "hole"
> in the bios comm list if it has to look up the address.
But Arachne modem detection tool already reports COM4 as COM2 with
non-default port address... at least I believe so.
Is there anybody with this problem ? In fact, I can't tested, because
immediately after my introduction to world of internal modens, I
have learnt that only save settings is COM3 irq 4. But in these times,
internal modems had jumpers to set port and irq... ;-)
--
http://arachne.cz/
(Arachne WWW browser for DOS+Linux / Webhosting / MP3streaming)
