----- Original Message -----
From: "Clarence Verge" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Tuesday, December 12, 2000 2:44 PM
Subject: Re: PPP Link Is Down, Driver Not Installed???
> Curtis Matthiesen wrote:
> >
> > I get the above error message ("PPP Link Is Down, Driver Not
Installed")
>
> And a lot of other stuff all on one line. Outlook Express is ugly !
>
> Curtis, you have to provide more information - there are many
possibilities.
>
> Are you using manual or automatic login ? If manual, are you hitting F7 to
> switch to PPP ? What Arachne version is it? Do you have two Nameserver
> numbers in your Arachne.cfg ? Have you looked in PPP.log ?
Sorry Clarence, I'm new to Arachne and mailing lists so I didn't know,
for your information I'm using automatic login and I'm using version 1.68
and yes I've got two Nameserver numbers in my Arachne.cfg and my PPP.log and
Arachne.cfg are as follows:
Arachne.cfg is below:
[dialer]
DialPage file:ppp_init.htm
Dialer @MINITERM.EXE>PPP.LOG
TerminalWindow @MINITERM.EXE
UseTerminal No
Port 1
Irq 4
Base 0x3f8
Mode 8N1
Speed 19200
InitString ATZ
DialString ATDT
PhoneNumber 372-3632
Autologin No
WaitFor1 name:
Response1 \u
WaitFor2 sword:
Response2 \p
WaitFor3 >
Response3 ppp
PPPusername [EMAIL PROTECTED]
PPPpassword XXXXXXX
;Port values: 0=non-standard serial (COM) port, 1-4 standard ports
;Base values: 0x??? (eg. 0x3e8) - Base and Irq are used for "Port 0"
;Mode values: databits/parity/stopbits (eg. 8N1)
[tcp/ip]
IP_Address PPP
IP_Grab IP address set to
NameServer 206.191.82.225
AltNameServer 206.191.83.225
Gateway 0.0.0.0
AltGateway 0.0.0.0
Netmask 0.0.0.0
TCPconfig PPPTCP.CFG
;IP_Address n.n.n.n ... fixed IP address
;IP_Address PPP ... for PPP.EXE and PPPD.EXE (get address from PPP.LOG)
;IP_Address BOOTP ... WatTcp attepmts to use BOOTP protocol
;IP_Address %enviro% ... Minuet style (enviroment variable, like %MYIP%)
;IP_Address WATTCP ... use ONLY values from TCPconfig (variable "my_ip")
;IP_Grab string ... prefix of IP address in PPP.LOG ("IP address set
to")
;TCPconfig filename ... name of WatTcp configuration file (often
WATTCP.CFG)
PPP.log is below, and I got this after I got disconnected and got the
error message:
MINITERM 1.65 - external dialer for PPP/SLIP drivers. (c)2000 Arachne Labs.
* Reading configuration file C:\ARACHNE\ARACHNE.CFG
* Initializing modem. Press <Esc> to abort.
ATZ
OK
* Dialing 372-3632. Press <Esc> to abort.
ATDT372-3632
CONNECT 14400/V42BIS
* Leaving MINITERM and trying SLIP/PPP. Press <Ctrl>+<Pause> to abort.
PPPD status: IP address set to
Hope this helps and I look forward to hearing back from you.
Sincerely
Curtis Matthiesen
>
> Please paste the [dialer] and [tcp/ip] sections of your Arachne.cfg file
into
> your next message. Replace your password with X's.
> If you can, please add a copy of PPP.log. to get this, type altE to shell
to
> DOS and copy ppp.log to ppp.sav. Then you can type exit to return and
hangup.
>
> - Clarence Verge
> --
> - Help stamp out FATWARE. As a start visit: http://home.arachne.cz/
> --
