At 02:05 21-8-01 +0000, you wrote:
>On Mon, 20 Aug 2001 13:05:41 +0200, Flip ter Biecht wrote:
>
>> 1. Do you run arachne under windows? If not, the drivers provided by
>> windows will have to be installed in their DOS version (if exist). See the
>> listing in windows Control Panel -> system -> devices (or similar) ->
>> sound, for details on the soundcard. Maybe you can activate dos support
>> from there, too (but then only for windows' dos-box)
>
>Here Arachne is not running from the windows DOS-box because of lack of
>memory when dialing.
>However the soundcard (Soundblaster PCI128) works under DOS if started
>from the DOS-box (the installation has been done under Windows).
>CD-player runs with DOS and Windows... no problem at all.
>
>To be able to install the soundblaster card in DOS (without Windows) I
>need the adress and the IRQ of the PCI-slot. I am not able to get these
>details from the windows installation (they must be there!).
>On a friends computer we have the same soundcard working with DOS
>only... but his PCI-slots are diffirent to mine.
>We are working on this and are about sure we will discover the secrets when
>the hollydays are fully over.
>Of course we will let you all know...
Holidays is what gives me time to respond...
I'm having slight trouble describing the situation because I'm using a
Durch win95.
Nevertheless the info on the soundcard from the "system -> device list"
contains both DMA and IRQ addresses although they're on the bottom of a
list with IO adresses; did you see those?
>
>> At 17:57 18-8-01 -0400, you wrote:
>>> Hello Bastiaan-
>>> The pc is a HP Pavilion and I believe the sound card is the normal setup
>>> for most newer computers....on the back there are jacks for mic,
>>> speakers etc and I am sure it just plugs right down on to the
>>> motherboard.
>>> Good luck- and thanks for the reply---
>>> Neil T.
>
