[email protected] writes: > -------- Original Message -------- > From: Pičugins Arsenijs<[email protected]> > Apparently from: [email protected] > To: Eco-Conscious Computing <[email protected]> > Subject: Re: [Arm-netbook] asus eeepc 7inch, modifying it to accept a pc card > Date: Sun, 11 Feb 2018 23:40:08 +0200 > > >> It seems to have a wide tip, so I'm wondering if it's suitable for soldering >> things like a 0.8-pitch connector... > > It has a swappable solder iron head. The solder iron > head I have looks like a screwdriver. It is about > 3mm wide. I have bought another solder iron > head. Shaped like a pencil.
I suggest a wide, flat solder iron tip and lots of flux (e.g. “Loethonig”). 0.8-pitch gets easier to solder with a technique called drag soldering. You bathe the connector in thick flux, then apply solder to the flat solder iron head, then slowly drag the solder ball across all contacts. The flux prevents the solder ball from fusing adjacent pins. I really recommend this over a sharp, thin-tipped solder head for narrow pitches. -- Ricardo GPG: BCA6 89B6 3655 3801 C3C6 2150 197A 5888 235F ACAC https://elephly.net _______________________________________________ arm-netbook mailing list [email protected] http://lists.phcomp.co.uk/mailman/listinfo/arm-netbook Send large attachments to [email protected]
