Senad, I don't want to take this conversation much further and send a laundry list of issues we faced with Switchware to this forum, and the myriads of bugs we have wrestled with in the past 18 months, as that list is too long and this forum is not for that purpose.
>In addition, our clients we deal on regular basis do > not "disappear". Each and every client is looked after by us. > They do not, "install" the software try it and then come back > after several weeks/months and start the install process all > over again... That is not a workable model for anyone. The answer to your above comments is already known to you and it is already mentioned in Para-1. As you already knew, the two install efforts by me, one in September-October 2004 and One in November-December 2004 have failed to install a working software. On several occasions when I have reverted back to you on giving me a working version, your answer ( as well as Stephen Wingfield's ) was that Bicom don't have one ready. Infact, as I remember this correctly, Switchware was taken out of your product list due to these issues. Moreover is it ethical or legitimate to sell a software that has to be installed only by your technical team and works only on a specific hardware for a given network card and for a given IP. You don't even have a tarball to download and install till today, let alone a CD image?. This is not the way products are sold, where everything is closed, even the features of Asterisk that are available otherwise. > Our "installed" clients certainly do not try to look > into our source code and then say "it is not working". I don't understand what you mean by looking into your source code, but if you mean that "once Switchware is installed, live with what Bicom allows you to do with Asterisk, and dont ask questions like 'Why Cannot I use 4 Digit extensions' or 'Why cant I use ASTCC with Switchware' or 'Why cannot I create more than X number of channels'" or millions of other such questions, my answer is that this is totally out of line with the purpose of Asterisk as an Open Source software and if Digium knew what is going on, probably you are going to have legal issues as far as the GPL of the code is concerned, in the same way Sysmaster did with their SM7000 products. Your Channel Locking and per channel pricing poilicy I am sure will put Oracle and Larry Ellsion to shame. I feel that Bicom should have spent more time making Switchware or PBXware work cleanly, rather than spending most of the time in copyprotecting and closed sourcing Asterisk so that if the customer has to move the installation to another server, they have to call you for a new license code and pay you for the installation, rather than doing it himself. This is against the open source philosophy we are all trying to benefit from. Seshu Kanuri -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Senad J Sent: Thursday, August 04, 2005 12:47 PM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: RE: [Asterisk-Users] Features you'd like to see in a GUI? > If your intention is just to build a GUI for Asterisk, read no > further. > If your desire is to build something more purposeful, your best bet > would be to see the existing commercial GUI/HostedPBX offerings like > Pbxware and Switchware from bicomsystems.com ( > http://www.bicomsystems.com) and Thirdlane Technologies > (http://www.thirdlane.com/opensource.htm) > and > the Open Source software like AMP and try to emulate (or preferably > improve upon) them. > > My suggestion is to create a "VOIP Business in a Box System" that has > inter-alia following list of modules: > > 1) GUI To configure Administer Asterisk Extensions across many servers > 2) Postpaid and Prepaid Billing modules with realtime call progress > detection and call cut-off 3)CRM Module for customers to register and > provide their information for recurring billing. > 4)Web based conference room management module 5)Web based click to > dial and callback module > > Many of these modules are already available on Open Source like > SugarCRM, AsreskiCC etc., and [EMAIL PROTECTED] CD contains AMP and > SugarCRM at this time, besides other Open Source utilities like > PhpMyAdmin. > > Here is the bottomline: > ---------------------- > The real need is for a commercially deployable solution that can > create a business, without too many additions to it. > > Bicom Systems has promised for too long that their Pbxware and > Switchware can fullfill this need to create a business, but they never > deliverd their promise. PBXware and Switchware have been a total and > expensive disappointment to me and for the few who invested in them. I would not normally reply on a post like this, but since you are publicly expressing your opinion on products and services that we offer, I must defend our years of work. We have PBXware and SWITCHware deployed at many locations around the globe - all working just fine. The combination of SWITCHware and other applications (Billing, CMS, Products & Services Database, Media Proxy, SER, Cluster servers etc) form what we call "Telco in a BOX". We have deployed such solutions in North America, Europe and shortly Asia. Our clients are small to medium and some of largest blue chip corporate companies in the world and even Chip Manufacturers. Our distributors include approved Digium distributors and have been deploying our products with no major issues. As for "expensive disappointment" ... What is expensive ? If you mean a small switch costing several thousands or complete solutions costing several hundred of thousands. Take your pick ... In addition, our clients we deal on regular basis do not "disappear". Each and every client is looked after by us. They do not, "install" the software try it and then come back after several weeks/months and start the install process all over again... That is not a workable model for anyone. Our "installed" clients certainly do not try to look into our source code and then say "it is not working". As for putting "Business in a BOX" and any of the many other projects together of which this list has had to endure from you in the past 24 months, we wish you the best of luck and trust that they neither have proved too expensive or disappointing to discourage you further. Senad Jordanovic www.bicomsystems.com _______________________________________________ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users -------------------------------------------------------- NOTICE: If received in error, please destroy and notify sender. Sender does not waive confidentiality or privilege, and use is prohibited. _______________________________________________ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users