Hello All , I installed a x100p clone device in a system .
I pulled (Wed, 26 Oct 2005 early am) cvs & compiled & installed for a
2.6 kernel . We call this system 'test' . This system is a HP Vectra
with a 933MHZ processor . Test has all the z* modules installed (*1).
and can see the x100p (ie *2) .
The other system has been operational for some time . I have a ata-186
responding to two numbers 21 & 22 . I attached a 6 line cord between
the ata-186 port 22 & the 'line' side of the x100p . I have configured
the 3 necessary files (*3) . Now when I call 22 from an ipphone the
x100p does not pickup the line . All it does is ring .
I have to be missing something here . Tia , JimL
ps: Here is one problem I have yet been unable to resolv . I am unable to
move the x100p to some other IRQ & at present it is sharing irq 9 with
the SMBus . Anyone know how to work around this ?
00:1f.3 SMBus: Intel Corporation 82801AA SMBus (rev 02)
Subsystem: Intel Corporation 82801AA SMBus
Flags: medium devsel, IRQ 9
I/O ports at 1810 [size=16]
01:02.0 Communication controller: Tiger Jet Network Inc. Tiger3XX Modem/ISDN
interface
Subsystem: Unknown device 8085:0003
Flags: bus master, medium devsel, latency 64, IRQ 9
I/O ports at 2000 [size=256]
Memory at ec100000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [40] Power Management version 2
(*1)
# modprobe -vl
/lib/modules/2.6.13.2/misc/ztdynamic.ko
/lib/modules/2.6.13.2/misc/ztdummy.ko
/lib/modules/2.6.13.2/misc/ztd-loc.ko
/lib/modules/2.6.13.2/misc/ztd-eth.ko
/lib/modules/2.6.13.2/misc/zaptel.ko
/lib/modules/2.6.13.2/misc/wcusb.ko
/lib/modules/2.6.13.2/misc/wcte11xp.ko
/lib/modules/2.6.13.2/misc/wctdm.ko
/lib/modules/2.6.13.2/misc/wct4xxp.ko
/lib/modules/2.6.13.2/misc/wct1xxp.ko
/lib/modules/2.6.13.2/misc/wcfxo.ko
/lib/modules/2.6.13.2/misc/torisa.ko
/lib/modules/2.6.13.2/misc/tor2.ko
/lib/modules/2.6.13.2/misc/pciradio.ko
(*2)
# cat /proc/zaptel/1
Span 1: WCFXO/0 "Wildcard X101P Board 1"
1 WCFXO/0/0 FXSKS
(*3)
# cat /etc/zaptel.conf
fxsks=1
loadzone=us
defaultzone=us
# cat /etc/asterisk/zapata.conf
[trunkgroups]
[channels]
;language=en
signalling=fxs_ks
context=x100p-incoming
;usecallerid=yes
;hidecallerid=no
;callwaiting=no
;threewaycalling=yes
;transfer=yes
;echocancel=yes
;echotraining=yes
channel => 1
# cat /etc/asterisk/zapata.conf
...snip...
[x100p-incoming]
; incoming calls from the FXO port are directed to this context from zapata.conf
exten => s,1,Answer
exten => s,2,Echo
--
+------------------------------------------------------------------+
| James W. Laferriere | System Techniques | Give me VMS |
| Network Engineer | 3542 Broken Yoke Dr. | Give me Linux |
| [EMAIL PROTECTED] | Billings , MT. 59105 | only on AXP |
+------------------------------------------------------------------+
_______________________________________________
--Bandwidth and Colocation sponsored by Easynews.com --
Asterisk-Users mailing list
[email protected]
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
