I have a tellabs 2572 echo can wired and setup according to the
instructions in
http://www.voip-info.org/tiki-index.php?page=Tellabs+Hardware+Echo+Cancellers
. I added the echo can between my zaptel card and my adit 600 channel
bank. I used the straight thru and crossover cables as instructed.
I get a Yellow alarm on my zaptel card (digium x100p) and on the echo
can under *Send In* the rem light is yellow and under *Rcv In* the local
light is red. Are there any changes I should be making to my adit 600
setup or my zaptel.conf?
on the echo can option 20 is 5(ESF), 60 is 1(B8ZS), and 63 is 0
my zaptel.conf
fxsks=1-8
fxoks=9-48
span=1,1,7,esf,b8zs
span=2,1,7,esf,b8zs
adit 600
--------------------------------------------------------------
SLOT A:
Settings for DS1 1:
Circuit ID: CAC DS1# A:1
Up/Down: UP
Framing: ESF
Line Coding: B8ZS
Line Build Out: DSX-1 EQUALIZATION FOR 0-133 ft. (CSU 0dB)
Loop Code Detection: ON
Loopback: OFF
FDL Type: None
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
