Michael. Although the SPA-3102 will allow you to connect to your pstn
I've found that it isn't all that good of a unit. I have the earlier
model, the 3000, and constantly had to battle with echo. Now that I have
a X100P FXO card the echo is all gone. Consider getting an internal
FXS/FXO card. They can be had for just a little more than what you would
pay for the 3102 but in my opinion you will not regret it. As for
calling both the cell and home phone, yes very simple, but will require
you to have another trunk besides your pstn to send the outgoing call over.
Michael Bryenton wrote:
Thanks for the advice. I have decided for now to keep Bell. I am
looking to buy a Linksys SPA-3102 to connect my PSTN to my home phones.
A quick scenario question:
Once it has been all hooked up - I want an incoming call to not only
ring the home phone but also ring my cell. Is this possible?
What else do I need? Do I need to purchase a an outgoing SIP Line?
Mike
------------------------------------------------------------------------
*From:* Christopher Allsop [mailto:[EMAIL PROTECTED]
*Sent:* June 22, 2007 10:50 AM
*To:* 'Michael Bryenton'; [email protected]
*Subject:* RE: [on-asterisk] newbie questions
Hi There.
If you are looking at canceling your Bell phone line, you might want
to consider going with a phone provider that will still be able to
offer you 911 service. Although I currently do not use them, I have
been looking into Unlimitel since they offer 911 service and you can
port your phone number over to them.
A number of people on the list here seem to use Unlimitel and from
what I have heard it is good.
Good luck.
Chris
PS. Enjoy building your system this weekend. I set up mine a few weeks
ago with a computer I bought for $30 used from a computer store. It
doesn’t take much to get up and running!
------------------------------------------------------------------------
*From:* Michael Bryenton [mailto:[EMAIL PROTECTED]
*Sent:* June 22, 2007 10:33 AM
*To:* [email protected]
*Subject:* [on-asterisk] newbie questions
I sent to the Ottawa Asterisk User Group but the site and mailing list
seems to be down.
I would like to build a TRIXBOX this weekend and eventually cancel
phone service with Bell.
My experience as I haven't got to a meeting yet is ready the book
"Trixbox Made Easy".
I am currently a Teksavvy DSL user - I guess I would have to switch to
dry DSL (or would I be better off with cable internet?)
I am looking for a recommendation for a service provider - perhaps
with the option of keeping my old number.
Most of my calling is local - so would prefer a unlimited local
bundled price.
Features not that important - what I need I hope to make Asterisk do
for me.
I am currently in the market for an ATA adapter - seems like the
PAP2T-NA is the one to get - correct?
Any help would be appreciated.
Thanks,
Mike
