The web interface is disabled while a call is in progress on (Handy|Budge)tone's-- is that the unresponsiveness you mean?
On Tue, 26 Jun 2007, Peter MacFarlane wrote: > You can use an ATA as your FXS port. I use a Handytone 488 but I don't > necessarily recommend it. It gets unresponsive on the web interface but > still usually works. Guess I'll have to try a firmware update. > > Peter M. > > Michael Bryenton wrote: > > The X100P from what I read is just a single port FXO card - not a > > FXO/FXS card. > > I was looking for a cheaper alternative to a Digium TDM11B card > > because people mentioned about the echo issues with the SPA3102. > > Are those the only choices for a FXO/FXS card/box? > > > > Mike > > > > On 6/24/07, *Peter MacFarlane* <[EMAIL PROTECTED] > > <mailto:[EMAIL PROTECTED]>> wrote: > > > > The card Syd mentions (X100P) is about as functional and cheap as they > > get. The only issue I has was problems with the server not realizing > > that the line is hung, necessitating a manual hangup from the FOP. Oh, > > yea, and some of these don't work in a fast motherboard. But ever > > since > > we switched to the cable co. as our main line provider, the line > > hangup > > hasn't been an issue. (Anyone?) Is that because they do supervised > > disconnect on their lines by default (Unlike Bell)? I also > > noticed that > > the wall phone blings when the caller hangs up. Interesting side > > effect. > > > > Peter M. > > > > > > Michael Bryenton wrote: > > > Can you recommend a inexpensive FXO/FXS card? > > > > > > > > > > --------------------------------------------------------------------- > To unsubscribe, e-mail: [EMAIL PROTECTED] > For additional commands, e-mail: [EMAIL PROTECTED] > >
