I definitely recommend the PAP2/SPA3102, mine has been working with no
problems since 2009.
Henry

On Wed, Aug 8, 2012 at 5:50 PM, Roger Si <[email protected]> wrote:

> i have been using former linksys PAP-2 for several years, now Cisco
> SPA3102 ( i think) with no problem. also, i have been using Grandstream
> HT702 recently  as well, so far no issues.
>
> Yajie
>
>
> On 2012-08-08, at 4:09 PM, Wai Vii wrote:
>
> > Best thing to do with it is stick it under the tires of your SUV.
> > Unfortunately, I've nothing better to suggest off the top of my head
> > at the moment.
> >
> > On 8/8/12, Chad Osmond <[email protected]> wrote:
> >> On Wed, Aug 8, 2012 at 12:05 PM, Mark Brown <[email protected]> wrote:
> >>
> >>> Hey Taug'ers
> >>>
> >>> Has anyone had success with the Cisco SPA112 device, or is it just me?
> >>>
> >>> As far as I'm concerned - the Cisco SPA112 is a complete lemon, stay
> far
> >>> far away!
> >>>
> >>
> >>
> >> Hi,
> >>
> >> I installed one for a client that had a local PBX. My initial response
> was
> >> that it was fantastic. The quick setup took a few seconds, cordless
> phone
> >> set worked flawlessly and I've heard 0 complaints in the past 3 months.
> >> I then bought one for myself, when I moved to a new Bell-free house.
> >>
> >> The first SPA-122 was dead after 3 days, no tone, no dhcp, nothing.
> >>
> >> The replacement SPA-112 never worked over NAT. I received incoming
> audio,
> >> but no outbound audio ever made it out, (Yes, this is the reverse of a
> >> typical NAT issue). Debugging is nearly impossible since the debug
> option
> >> didn't record any logs.
> >>
> >> I gave up and slapped PIAF on a Dell server I had floating around and
> >> registered it there and it's been working ok for 3 weeks
> >>
> >> I'll never buy another one again, that's for sure.
> >> Does anyone have a recommendation for a ATA adapter that works nicely?
> >>
> >> Chad
> >>
> >
> > --
> > Sent from my mobile device
> >
> > ---------------------------------------------------------------------
> > To unsubscribe, e-mail: [email protected]
> > For additional commands, e-mail: [email protected]
> >
>
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: [email protected]
> For additional commands, e-mail: [email protected]
>
>


-- 
*
------------------------------------------------------------------------------------
*
*Mr. Henry L. Coleman *
*
*

Reply via email to