Hi
I'm not to sure if this would be of benefit to anyone else, but is there
any chance of adding a "short hook flash" package option (100ms) to
Zaptel 1.2.x for us Australian Astlinux zaptel users, I've been
successfully using the patch below for sometime
I've added and successfully tested the following on tags/0.4.8
1. add new patch file shortflash.patch to package/zaptel/
--- zaptel-1.2.19.orig/zaptel.h 2007-04-25 04:33:29.000000000 +1000
+++ zaptel-1.2.19/zaptel.h 2007-11-21 17:32:46.000000000 +1100
@@ -930,7 +930,7 @@
#define ZT_DEFAULT_WINKTIME 150 /* 150 ms default wink time */
-#define ZT_DEFAULT_FLASHTIME 750 /* 750 ms default flash time
*/
+#define ZT_DEFAULT_FLASHTIME 100 /* 750 ms default flash time,
100 ms for short flash */
#define ZT_DEFAULT_PREWINKTIME 50 /* 50 ms before wink */
#define ZT_DEFAULT_PREFLASHTIME 50 /* 50 ms before flash */
@@ -940,14 +940,14 @@
#define ZT_DEFAULT_RXWINKTIME 250 /* 250ms longest rx wink */
#endif
#define ZT_DEFAULT_RXWINKTIME 300 /* 300ms longest rx wink (to
work with the Atlas) */
-#define ZT_DEFAULT_RXFLASHTIME 1250 /* 1250ms longest rx flash */
+#define ZT_DEFAULT_RXFLASHTIME 120 /* 1250ms longest rx flash,
120ms for short flash */
#define ZT_DEFAULT_DEBOUNCETIME 600 /* 600ms of FXS GS signalling
debounce */
#define ZT_DEFAULT_PULSEMAKETIME 50 /* 50 ms of line closed when
dial pulsing */
#define ZT_DEFAULT_PULSEBREAKTIME 50 /* 50 ms of line open when
dial pulsing */
#define ZT_DEFAULT_PULSEAFTERTIME 750 /* 750ms between dial pulse
digits */
#define ZT_MINPULSETIME (15 * 8) /* 15 ms minimum */
-#define ZT_MAXPULSETIME (200 * 8) /* 200 ms maximum */
+#define ZT_MAXPULSETIME (20 * 8) /* 200 ms maximum, 20ms for
short flash */
#define ZT_PULSETIMEOUT ((ZT_MAXPULSETIME / 8) + 50)
#define ZT_RINGTRAILER (50 * 8) /* Don't consider a ring "over"
until it's been gone at least this
2. Change package/zaptel/Config.in
config BR2_PACKAGE_ZAPTEL
bool "zaptel"
default n
depends on BR2_PACKAGE_LINUX
depends on BR2_PACKAGE_NEWT
help
Zaptel - Linux drivers and utilities for Zapata and Digium
cards
for use with Asterisk:
http://www.asterisk.org <http://www.asterisk.org/>
config BR2_PACKAGE_SHORTFLASH
bool "short flash"
default n
depends on BR2_PACKAGE_ZAPTEL
help
Change hook flash timer from 1250ms to 100ms, used for
Australia
3. Add changes to package/zaptel/zaptel.mk
ifeq ($(strip $(BR2_ZAPTEL_SHORTFLASH)),y)
toolchain/patch-kernel.sh $(ZAPTEL_DIR)
package/zaptel/shortflash.patch
endif
3.1 Example
$(ZAPTEL_DIR)/.source: $(DL_DIR)/$(ZAPTEL_SOURCE)
zcat $(DL_DIR)/$(ZAPTEL_SOURCE) | tar -C $(BUILD_DIR)
$(TAR_OPTIONS) -
ln -sf $(ZAPTEL_DIR) $(BUILD_DIR)/zaptel
ifeq ($(strip $(BR2_TARGET_RT)),y)
toolchain/patch-kernel.sh $(ZAPTEL_DIR) package/zaptel/ rt\*.patch
endif
ifeq ($(strip $(BR2_ZAPTEL_SHORTFLASH)),y)
toolchain/patch-kernel.sh $(ZAPTEL_DIR)
package/zaptel/shortflash.patch
endif
toolchain/patch-kernel.sh $(ZAPTEL_DIR) package/zaptel/
zaptel\*.patch
touch $(ZAPTEL_DIR)/.source
Guy
-------------------------------------------------------------------------
This SF.net email is sponsored by: Microsoft
Defy all challenges. Microsoft(R) Visual Studio 2005.
http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
_______________________________________________
Astlinux-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/astlinux-users
Donations to support AstLinux are graciously accepted via PayPal to [EMAIL
PROTECTED]
