Kevin Kiely wrote: > Thanks again for the suggestion; I changed the /etc/inittab file but after > I see grub loading there is no additional display. Am I missing something? > > [EMAIL PROTECTED] ~]# cat /mnt/sdd/etc/inittab > # > # /etc/inittab > # > # $Id: inittab 1681 2004-09-01 18:12:49Z $ > # > > console::sysinit:/etc/rc sysinit > console::respawn:/sbin/getty -L 19200 /dev/ttyS0 vt100
Kevin, That affects the system AFTER the system has executed init (so after it has gone beyond the initrd). If you wait long enough does something come up? Are you able to ssh into the box? Darrick > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of Darrick > Hartman > Sent: Friday, November 23, 2007 7:36 AM > To: AstLinux Users Mailing List > Subject: Re: [Astlinux-users] PC ENGINES ALIX > > If you're using the standard i586 image, there is no support for a > console on the serial port. You would need to edit the inittab file and > add support for a console on /dev/ttyS0. > > You should be able to ssh into the box if you know the address. > > Kevin Kiely wrote: >> Thanks for the feedback Darrick; It seems like it start to boot with the >> 586 image, although I cant see any info on the terminal after "GRUB > loading" >> I tried different settings with the terminal and baud with no luck. >> >> -----Original Message----- >> From: [EMAIL PROTECTED] >> [mailto:[EMAIL PROTECTED] On Behalf Of Darrick >> Hartman (lists) >> Sent: Thursday, November 22, 2007 11:45 PM >> To: AstLinux Users Mailing List >> Subject: Re: [Astlinux-users] PC ENGINES ALIX >> >> Philip Prindeville wrote: >>> This was just posted on Asterisk-users: see the thread starting with >>> <[EMAIL PROTECTED]> >>> entitled "Asterisk on Pcengines Alix board", in particular Andrea >>> Cristofanini's posting on 11/21/2007. >>> >>> >>> Kevin Kiely wrote: >>>> Has anyone used astlinux with the new PC Engines ALIX board? >>>> >>>> I tried the i586 image but had some problems seeing the grub output >>>> and astlinux loading after the BIOS loaded. I played with the terminal >>>> baud rate but didn't get it. >>>> >>>> Kevin >> Kevin, >> >> I do plan on getting an ALIX. Should be very similar to the net5501 >> board. You'll likely have to use an image from trunk or asterisk-beta. >> The kernel is newer in there than in the 0.4 releases. We should see >> a 0.5 release soon (although soon is to be determined, but I'm hoping >> for the end of the month unless some big problem is discovered). >> >> Darrick > > -- Darrick Hartman DJH Solutions, LLC http://www.djhsolutions.com Small Business IT Specialists Office: 920.547.4535 Cell: 920.901.3113 ------------------------------------------------------------------------- This SF.net email is sponsored by: Microsoft Defy all challenges. Microsoft(R) Visual Studio 2005. http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ _______________________________________________ Astlinux-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/astlinux-users Donations to support AstLinux are graciously accepted via PayPal to [EMAIL PROTECTED]
