krzys;207132 Wrote: 
> To opaqueice: I'm aware of the Inguz gain adjustment. I'm comparing
> inverted polarity to no correction. According to my Behringer DCX, and
> its time alignment procedure, all drivers have the same polarity.
> Imaging things you said, ok I will measure but around 6 dB can not be
> missed by ear. You remember the 15 firmware a lot of people said it
> sounded different (they said better but better means often just
> louder). Did you try it?
> 
> If one group of drivers was inverted the sound would became unbalanced
> but it isn't, just louder (volume on the SB have to be lowered from 95
> to 80).  The change occurs for all drivers. 
> Quote:  you're playing very asymmetric signals and your speakers are
> horrible (very high levels of harmonic distortion could do that). If
> not, then either you're imagining things or something else in
> Inguz/SS/preamp is boosting the level.
> 
> I'm playing music that' all. Distortion: Altec woofers and horns, slot
> tweeter, no distortion there. Signal goes from SB to DCX and the amps,
> analogue volume control after the DCX quite normal. You suggest
> inversing wires but the inverted polarity does exactly that isn't it?
> 
> To mswlogo: how do you check phase with a meter, voltage polarity? Send
> a signal and measure AC voltages? To be sure I will measure the levels
> with pink noise.
> 
> Chris

SPL Meter. You want to try every pair and invert one back and forth
such that you get max SPL. When in phase it will be louder. Out of
phase there will be cancelation. You do this while playing pink noise.
Some test CD's and DVD's have this. This is tricky at different
frequencies. At higher frequencies it is hard to detect/measure. You
may only need to match midrange and woofers. This is all just a hunch.

I'd also verify what you think you hear with an SPL meter.

My system allows on the fly invert of everything because it can change
how it sounds. But I'm not sure this can happen with just 2 speakers.
It can happen with more than two though.

You don't have multiple speakers of the same channel do you? Than can
cause problems too.


-- 
mswlogo
------------------------------------------------------------------------
mswlogo's Profile: http://forums.slimdevices.com/member.php?userid=9090
View this thread: http://forums.slimdevices.com/showthread.php?t=35884

_______________________________________________
audiophiles mailing list
[email protected]
http://lists.slimdevices.com/lists/listinfo/audiophiles

Reply via email to