RioTubes;371790 Wrote: > You are indeed working backwards. The critical interface is amp and > speakers. The transporter specs are pretty standard for a digital > source (2-3V output depending on unbalanced or balanced transmission > and benign impedance of around 100 ohm). Because you don't mention a > preamp I'll assume you plan to run direct into the amp. Some things to > consider: > > - With the transporter's standard specs, look for an amp with input > sensitivity less than 1.5V (less than 1V even better) > - The amp should not have really low input impedance. Probably no lower > than 10K and better if higher. > > Proper impendance and voltage ratios (amp/source) also apply when using > passive preamps like a TVC. > > - you may want to take advantage of balanced transmission. So consider > an amp with balanced inputs. > > Other than the above, it is far more important to understand your > speaker's impedance curve and focus on optimizing the amp/speaker > interface. > > Sorry for no specific recommendation, just some homework!
Would these be reasonable figures? I plan on connecting the TP direct with my amp via balanced connection. Input sensitivity: 1 V for 28.28 V Input impedance: 33 k Ω unbalanced; 66 k Ω balanced -- breadvan ------------------------------------------------------------------------ breadvan's Profile: http://forums.slimdevices.com/member.php?userid=7532 View this thread: http://forums.slimdevices.com/showthread.php?t=56628 _______________________________________________ audiophiles mailing list [email protected] http://lists.slimdevices.com/mailman/listinfo/audiophiles
