i just installed fedora 8 and with b43-fwcutter i installed firmware
v4...now if i use NetworkManager and i connect to the ap,i insert wep key
but after a while it ask me again for the password and i don't get
connected...
while if i use iwconfig i got connected but i can't ping anything or
visiting websites,also on the access point it tells me that another device
is connected..here there is some informations:
[EMAIL PROTECTED] ~]# iwconfig
lo no wireless extensions.
eth0 no wireless extensions.
wmaster0 no wireless extensions.
wlan0 IEEE 802.11g ESSID:"che12345"
Mode:Managed Frequency:2.462 GHz Access Point: 00:0C:41:19:2D:C1
Bit Rate=1 Mb/s Tx-Power=27 dBm
Retry min limit:7 RTS thr:off Fragment thr=2346 B
Encryption key:6FFB-F8F9-D105-87F6-335C-8985-D8
Link Quality=96/100 Signal level=-38 dBm Noise level=-38 dBm
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:0 Missed beacon:0
[EMAIL PROTECTED] ~]# dmesg|grep b43
b43-phy0: Broadcom 4311 WLAN found
b43-phy0 debug: Found PHY: Analog 4, Type 2, Revision 8
b43-phy0 debug: Found Radio: Manuf 0x17F, Version 0x2050, Revision 2
b43-phy0 debug: Adding Interface type 2
b43-phy0 debug: Loading firmware version 351.126 (2006-07-29 05:54:02)
b43-phy0 debug: Chip initialized
b43-phy0 debug: 32-bit DMA initialized
b43-phy0 debug: Wireless interface started
b43-phy0 debug: Using hardware based encryption for keyidx: 0, mac:
ff:ff:ff:ff:ff:ff
b43-phy0 debug: Disabling hardware based encryption for keyidx: 0, mac:
ff:ff:ff:ff:ff:ff
b43-phy0 debug: Using hardware based encryption for keyidx: 0, mac:
ff:ff:ff:ff:ff:ff
b43-phy0 debug: Disabling hardware based encryption for keyidx: 0, mac:
ff:ff:ff:ff:ff:ff
b43-phy0 debug: Using hardware based encryption for keyidx: 0, mac:
ff:ff:ff:ff:ff:ff
b43-phy0 debug: Disabling hardware based encryption for keyidx: 0, mac:
ff:ff:ff:ff:ff:ff
b43-phy0 debug: Removing Interface type 2
b43-phy0 debug: Wireless interface stopped
b43-phy0 debug: DMA-32 0x0200 (RX) max used slots: 1/64
b43-phy0 debug: DMA-32 0x02A0 (TX) max used slots: 0/128
b43-phy0 debug: DMA-32 0x0280 (TX) max used slots: 0/128
b43-phy0 debug: DMA-32 0x0260 (TX) max used slots: 0/128
b43-phy0 debug: DMA-32 0x0240 (TX) max used slots: 0/128
b43-phy0 debug: DMA-32 0x0220 (TX) max used slots: 8/128
b43-phy0 debug: DMA-32 0x0200 (TX) max used slots: 0/128
b43-phy0 debug: Adding Interface type 2
b43-phy0 debug: Loading firmware version 351.126 (2006-07-29 05:54:02)
b43-phy0 debug: Chip initialized
b43-phy0 debug: 32-bit DMA initialized
b43-phy0 debug: Wireless interface started
b43-phy0 debug: Using hardware based encryption for keyidx: 0, mac:
ff:ff:ff:ff:ff:ff
i think i'm missing something...but i don't know what...hope anyone can help
me
greetings
ruggiero
--
Io utilizzo la versione gratuita di SPAMfighter per utenti privati. Sino ad ora
ha rimosso 824 mail spam.
Gli utenti paganti non hanno questo messaggio nelle loro email .
Prova gratuitamente SPAMfighter qui:http://www.spamfighter.com/lit
_______________________________________________
Bcm43xx-dev mailing list
[email protected]
https://lists.berlios.de/mailman/listinfo/bcm43xx-dev
