Oops, sorry, here is the attached SPROM file. On Tue, Apr 15, 2008 at 11:39 PM, Stefanik Gábor <[EMAIL PROTECTED]> wrote:
> Looks like this is an Asus-specific issue. Can you try flashing the > attached SPROM file (with a modified MAC address, of course) into your card > to see if it results in *any* transmission? (Back up your SPROM first!) This > is from a non-Asus 4318/02, extracted from a working card. (I can't test it > myself now, as I don't have a usable Linux system ATM.) > > Also, what radio is WL-138G V2 using? Is it the same radio as other > 4318/02 cards? Someone with a broken WL-138G V2 should check. (With a broken > one, since you need to remove the radio's cover.) > > > > On Tue, Apr 15, 2008 at 3:37 AM, Larry Finger <[EMAIL PROTECTED]> > wrote: > > > Stefanik Gábor wrote: > > > > > Larry, can you attach an SPROM dump of your PCI BCM4318? I'm suffering > > > from the exact same problem, and it would be interesting to find out what > > > is > > > actually happening. Also, what card do you have? (Mine is an Asus WL-138G > > > V2 > > > R3.01, but R3.00 is affected too.) Please attach an lspci -v and lspci -vn > > > output too (or at least the revision number reported by lspci). > > > > > > > Here is the dump of the SPROM: > > > > 012000000F10431018430080020000000010001800000000FFFFFFFFFFFFFFFFFFFFFF > > FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF0000FFFFFFFFFFFFFFFFFFFFFFFF > > FFFF1B0061FC6119FFFFFFFFFFFFFFFFFFFFFFFFFFFF4230CA157DFA38FFFFFFFFFF3E > > 00FFFFFFFFFFFF3E00490002FF424709FFFFFF81130242 > > > > My card is an ASUS WL-138G V2 R3.00. I forgot to get the lspci output, > > but will send it tomorrow. > > > > Larry > > > > > > -- > Vista: [V]iruses, [I]ntruders, [S]pyware, [T]rojans and [A]dware. :-) > -- Vista: [V]iruses, [I]ntruders, [S]pyware, [T]rojans and [A]dware. :-)
4318.sprom
Description: Binary data
_______________________________________________ Bcm43xx-dev mailing list [email protected] https://lists.berlios.de/mailman/listinfo/bcm43xx-dev
