On Monday 14 April 2008 17:56:30 Larry Finger wrote: > > > Any ASUS WL-138G V2 R3.00 or R3.01 would fit the bill. The chip is a > > > BCM4318. If anyone has one in Europe and is willing to participate, > > > that would be great. If not, I could send the one that I have. It was > > > donated to me, and I would not need it to be replaced; however, > > > amazon.de has one for sale for 16 Euro, which is about what it would > > > cost for me to ship mine to you if you want it anytime soon. > > > > This one? > > > > http://www.amazon.de/ASUS-WL-138G-Funk-LAN-Adapter-Mbps/dp/B000H5UYCC/ref=sr_1_1?ie=UTF8&s=ce-de&qid=1208186185&sr=8-1 > > > > I'll immediately order it, if you're sure that's one that doesn't work. > > > > The picture looks exactly like mine.
Yeah well. I got the card and indeed it isn't able to transmit any data. Of course I can't make any forecasts on whether I will be able to solve this issue, but I will look into it. Thanks a lot for _finally_ providing me one of these cards instead of providing only hatemail (not you, but other people) :) The device doesn't produce any transmit status reports. That's what I see from a first look. Here come some hardware details in case somebody is interested: [ 966.619496] ssb: Core 0 found: ChipCommon (cc 0x800, rev 0x0D, vendor 0x4243) [ 966.619496] ssb: Core 1 found: IEEE 802.11 (cc 0x812, rev 0x09, vendor 0x4243) [ 966.619496] ssb: Core 2 found: PCI (cc 0x804, rev 0x0C, vendor 0x4243) [ 966.619496] ssb: Core 3 found: PCMCIA (cc 0x80D, rev 0x07, vendor 0x4243) [ 966.637500] ssb: SPROM revision 2 detected. [ 966.658366] ssb: Sonics Silicon Backplane found on PCI device 0000:02:05.0 [ 966.674476] b43-phy3: Broadcom 4318 WLAN found [ 966.714105] b43-phy3 debug: Found PHY: Analog 3, Type 2, Revision 7 [ 966.714105] b43-phy3 debug: Found Radio: Manuf 0x17F, Version 0x2050, Revision 8 [ 966.734069] phy3: Selected rate control algorithm 'pid' [ 966.736778] Broadcom 43xx driver loaded [ Features: PNR, Firmware-ID: FW13 ] [ 988.593922] input: b43-phy3 as /class/input/input8 [ 987.781568] b43-phy3: Loading firmware version 351.126 (2006-07-29 05:54:02) [ 987.781568] b43-phy3 warning: You are using an old firmware image. Support for old firmware will be removed in July 2008. [ 987.781568] b43-phy3 warning: You must go to http://linuxwireless.org/en/users/Drivers/b43#devicefirmware and download the latest firmware (version 4). [ 987.895936] b43-phy3 debug: Chip initialized [ 987.896206] b43-phy3 debug: 32-bit DMA initialized [ 988.967223] b43-phy3 debug: Wireless interface started [ 988.967247] b43-phy3 debug: Adding Interface type 2 [ 988.981264] phy3: HW CONFIG: freq=2412 [ 991.039238] b43-phy3 debug: Removing Interface type 2 [ 991.061533] b43-phy3 debug: Wireless interface stopped [ 990.024893] b43-phy3 debug: DMA-32 rx_ring: Used slots 0/64, Failed frames 0/0 = 0.0%, Average tries 0.00 [ 990.026360] b43-phy3 debug: DMA-32 tx_ring_AC_BK: Used slots 0/128, Failed frames 0/0 = 0.0%, Average tries 0.00 [ 990.031396] b43-phy3 debug: DMA-32 tx_ring_AC_BE: Used slots 0/128, Failed frames 0/0 = 0.0%, Average tries 0.00 [ 990.038040] b43-phy3 debug: DMA-32 tx_ring_AC_VI: Used slots 0/128, Failed frames 0/0 = 0.0%, Average tries 0.00 [ 990.048005] b43-phy3 debug: DMA-32 tx_ring_AC_VO: Used slots 0/128, Failed frames 0/0 = 0.0%, Average tries 0.00 [ 990.056402] b43-phy3 debug: DMA-32 tx_ring_mcast: Used slots 0/128, Failed frames 0/0 = 0.0%, Average tries 0.00 -- Greetings Michael. _______________________________________________ Bcm43xx-dev mailing list [email protected] https://lists.berlios.de/mailman/listinfo/bcm43xx-dev
