On Mon, Oct 7, 2013 at 8:17 AM, <[email protected]> wrote: > Step 1.) I followed this post to build Poky for the BBB: > https://gist.github.com/errordeveloper/4056193 > > Step 2.) I followed this to setup the SD card: > https://pixhawk.ethz.ch/tutorials/omap/boot_from_sd_sdhc > > Step 3.) I followed this for deploying my artifacts (MLO, u-boot, uImage & > file system) > https://pixhawk.ethz.ch/tutorials/omap/copy_sd_card > > I have also tried to swap out Step 2 above for the mkcard.txt script found > here: > http://downloads.angstrom-distribution.org/demo/beaglebone/ > > In all cases, I attempt to boot the BBB and I do not get anything over the > HDMI display and nothing hits my routers DHCP server to receive an IP > address. > > I do not have an FTDI Cable but can buy one if that is the logical next step > in debugging. > > Any advice? Without an FTDI Cable, is there anyway to watch the boot > process?
Get a Cable.. Regards, -- Robert Nelson http://www.rcn-ee.com/ -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/groups/opt_out.
