On 2/13/2014 3:52 AM, David Lewin wrote: > well not really, it didn't succeeded unlesse the following is wrong: > > flashing : > > rcn-ee.net/deb/microsd/wheezy/bone-debian-7.3-2014-01-24-2gb.img.xz > > and then overwrite > > scp ../xenomai/cdsteinkuehler/linux-dev/deploy/3.8.13xenomai-bone39.zImage >> [email protected]:/boot/uboot/zImage > > > This, allows to boot the board - leds are ok - but in a way that I can't > > - ssh to it as 192.168.7.2 > - ssh to it with a dhcp server running with ETH connected > - retrieved any status with my usb serial cable
You might have better luck if you copy over the modules along with the kernel. There are also the device tree and firmware files, but those are probably OK w/o being updated. cd / tar -xzvf /path/to/xenomai/cdsteinkuehler/linux-dev/ deploy/3.8.13xenomai-bone39-modules.tar.gz -- Charles Steinkuehler [email protected] -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/groups/opt_out.
