Anyway it didn't changed from the previous behaviour : - the board leds are ok, but can't access anymore -as I did with the 3.8.13-bone37 kernel- the 192.168.7.2 seems down - Usb prolific cable is not answering : but my cable may be in cause
2014-02-14 11:30 GMT+01:00 David Lewin <[email protected]>: > Well I found why; this is not exactly to be copied as is from the tarball: > build is a symbolic link to KERNEL and source don't need to be copied > neither : so *kernel *dir is left > > > 2014-02-13 16:03 GMT+01:00 Charles Steinkuehler <[email protected]> > : > > In your deploy directory is a tarball containing the kernel modules for >> the Xenomai kernel you just compiled. You need to extract those modules >> into the appropriate location on your target system. As mentioned >> previously, to do this you cd to root and extract the tarball. >> >> On 2/13/2014 8:24 AM, David Lewin wrote: >> > The 3.8.13-bone37 from flashed image is starting with ssh access, etc. >> > >> > So be sure :in addition to override the 3.8.13-bone39 .zImage to >> > /boot/uboot over it I need also to copy >> > >> >> the deploy/lib/modules/3.8.13xenomai-bone39 >> > >> > over >> > >> >> /lib/modules/3.8.13-bone37 >> > >> > >> > do you confirm ? >> > >> > >> > 2014-02-13 12:49 GMT+01:00 Charles Steinkuehler < >> [email protected]>: >> > >> >> On 2/13/2014 3:52 AM, David Lewin wrote: >> >>> well not really, it didn't succeeded unlesse the following is wrong: >> >>> >> >>> flashing : >> >>> >> >>> rcn-ee.net/deb/microsd/wheezy/bone-debian-7.3-2014-01-24-2gb.img.xz >> >>> >> >>> and then overwrite >> >>> >> >>> scp >> >> ../xenomai/cdsteinkuehler/linux-dev/deploy/3.8.13xenomai-bone39.zImage >> >>>> [email protected]:/boot/uboot/zImage >> >>> >> >>> >> >>> This, allows to boot the board - leds are ok - but in a way that I >> can't >> >>> >> >>> - ssh to it as 192.168.7.2 >> >>> - ssh to it with a dhcp server running with ETH connected >> >>> - retrieved any status with my usb serial cable >> >> >> >> You might have better luck if you copy over the modules along with the >> >> kernel. There are also the device tree and firmware files, but those >> >> are probably OK w/o being updated. >> >> >> >> cd / >> >> tar -xzvf /path/to/xenomai/cdsteinkuehler/linux-dev/ >> >> deploy/3.8.13xenomai-bone39-modules.tar.gz >> >> >> >> -- >> >> Charles Steinkuehler >> >> [email protected] >> >> >> >> -- >> >> For more options, visit http://beagleboard.org/discuss >> >> --- >> >> You received this message because you are subscribed to a topic in the >> >> Google Groups "BeagleBoard" group. >> >> To unsubscribe from this topic, visit >> >> https://groups.google.com/d/topic/beagleboard/HqwuSu2tLe8/unsubscribe. >> >> To unsubscribe from this group and all its topics, send an email to >> >> [email protected]. >> >> For more options, visit https://groups.google.com/groups/opt_out. >> >> >> > >> >> >> -- >> Charles Steinkuehler >> [email protected] >> >> -- >> For more options, visit http://beagleboard.org/discuss >> --- >> You received this message because you are subscribed to a topic in the >> Google Groups "BeagleBoard" group. >> To unsubscribe from this topic, visit >> https://groups.google.com/d/topic/beagleboard/HqwuSu2tLe8/unsubscribe. >> To unsubscribe from this group and all its topics, send an email to >> [email protected]. >> For more options, visit https://groups.google.com/groups/opt_out. >> > > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/groups/opt_out.
