Well I found why; this is not exactly to be copied as is from the tarball: build is a symbolic link to KERNEL and source don't need to be copied neither : so *kernel *dir is left
2014-02-13 16:03 GMT+01:00 Charles Steinkuehler <[email protected]>: > In your deploy directory is a tarball containing the kernel modules for > the Xenomai kernel you just compiled. You need to extract those modules > into the appropriate location on your target system. As mentioned > previously, to do this you cd to root and extract the tarball. > > On 2/13/2014 8:24 AM, David Lewin wrote: > > The 3.8.13-bone37 from flashed image is starting with ssh access, etc. > > > > So be sure :in addition to override the 3.8.13-bone39 .zImage to > > /boot/uboot over it I need also to copy > > > >> the deploy/lib/modules/3.8.13xenomai-bone39 > > > > over > > > >> /lib/modules/3.8.13-bone37 > > > > > > do you confirm ? > > > > > > 2014-02-13 12:49 GMT+01:00 Charles Steinkuehler < > [email protected]>: > > > >> On 2/13/2014 3:52 AM, David Lewin wrote: > >>> well not really, it didn't succeeded unlesse the following is wrong: > >>> > >>> flashing : > >>> > >>> rcn-ee.net/deb/microsd/wheezy/bone-debian-7.3-2014-01-24-2gb.img.xz > >>> > >>> and then overwrite > >>> > >>> scp > >> ../xenomai/cdsteinkuehler/linux-dev/deploy/3.8.13xenomai-bone39.zImage > >>>> [email protected]:/boot/uboot/zImage > >>> > >>> > >>> This, allows to boot the board - leds are ok - but in a way that I > can't > >>> > >>> - ssh to it as 192.168.7.2 > >>> - ssh to it with a dhcp server running with ETH connected > >>> - retrieved any status with my usb serial cable > >> > >> You might have better luck if you copy over the modules along with the > >> kernel. There are also the device tree and firmware files, but those > >> are probably OK w/o being updated. > >> > >> cd / > >> tar -xzvf /path/to/xenomai/cdsteinkuehler/linux-dev/ > >> deploy/3.8.13xenomai-bone39-modules.tar.gz > >> > >> -- > >> Charles Steinkuehler > >> [email protected] > >> > >> -- > >> For more options, visit http://beagleboard.org/discuss > >> --- > >> You received this message because you are subscribed to a topic in the > >> Google Groups "BeagleBoard" group. > >> To unsubscribe from this topic, visit > >> https://groups.google.com/d/topic/beagleboard/HqwuSu2tLe8/unsubscribe. > >> To unsubscribe from this group and all its topics, send an email to > >> [email protected]. > >> For more options, visit https://groups.google.com/groups/opt_out. > >> > > > > > -- > Charles Steinkuehler > [email protected] > > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to a topic in the > Google Groups "BeagleBoard" group. > To unsubscribe from this topic, visit > https://groups.google.com/d/topic/beagleboard/HqwuSu2tLe8/unsubscribe. > To unsubscribe from this group and all its topics, send an email to > [email protected]. > For more options, visit https://groups.google.com/groups/opt_out. > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/groups/opt_out.
