No testing needed. Request and RMA. http://www.elinux.org/Beagleboard:BeagleBoneBlack#RMA_Support
Gerald On Fri, Sep 25, 2015 at 4:41 AM, <[email protected]> wrote: > Hello Everybody, > > > Yesterday I opened my BeagleBoneBlack (rev C) and started working with it > > Today while I was trying accessing it trough SSH I got and error and then > I realized all the leds were off. > > Everytime I plug it back to the 5v adapter de PWR LED flash once and the > BeagleBone doesn't boot > > > I've been doing some research and I've found this link that describes my > problem. > > elinux.org/Beagleboard:BeagleBoneBlack > <http://elinux.org/Beagleboard:BeagleBoneBlack#Improper_Power_Down....All_Revisions> > > > Is there any other test that I should do? > > > Thanks in advance > > > PS: I tried to flash a Debian image again, but it just didn't boot from > the SD. > > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > For more options, visit https://groups.google.com/d/optout. > -- Gerald [email protected] http://beagleboard.org/ -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
