The one needling RMA is the flashing power LED. The issue you describe does sounds like a SW issue of sorts, but is not one I have heard of that often.
Gerald On Fri, Sep 25, 2015 at 10:25 AM, William Hermans <[email protected]> wrote: > Gerald, > > I actually have one of the boards that when issuing "shutdown now -r". > About 1 time in 3, the board will not power back up - Well, not properly > anyway. ethernet will continue blinking, power LED is on, but the USR LEDs > do not do their normal thing. Trying to ssh in, is futile. > > This same board, when using "reboot" has not shown these same symptoms, > and this is probably a software problem as I've noticed that it has been > getting worst over time. For instance, this would only happen maybe 1 in 20 > reboots a year or more ago. > > The board is an A5A . . . and yeah not going to RMA it, but I would not > mind testing . . . > > On Fri, Sep 25, 2015 at 6:34 AM, Gerald Coley <[email protected]> > wrote: > >> No testing needed. Request and RMA. >> >> http://www.elinux.org/Beagleboard:BeagleBoneBlack#RMA_Support >> >> >> Gerald >> >> On Fri, Sep 25, 2015 at 4:41 AM, <[email protected]> wrote: >> >>> Hello Everybody, >>> >>> >>> Yesterday I opened my BeagleBoneBlack (rev C) and started working with it >>> >>> Today while I was trying accessing it trough SSH I got and error and >>> then I realized all the leds were off. >>> >>> Everytime I plug it back to the 5v adapter de PWR LED flash once and the >>> BeagleBone doesn't boot >>> >>> >>> I've been doing some research and I've found this link that describes my >>> problem. >>> >>> elinux.org/Beagleboard:BeagleBoneBlack >>> <http://elinux.org/Beagleboard:BeagleBoneBlack#Improper_Power_Down....All_Revisions> >>> >>> >>> Is there any other test that I should do? >>> >>> >>> Thanks in advance >>> >>> >>> PS: I tried to flash a Debian image again, but it just didn't boot from >>> the SD. >>> >>> -- >>> For more options, visit http://beagleboard.org/discuss >>> --- >>> You received this message because you are subscribed to the Google >>> Groups "BeagleBoard" group. >>> To unsubscribe from this group and stop receiving emails from it, send >>> an email to [email protected]. >>> For more options, visit https://groups.google.com/d/optout. >>> >> >> >> >> -- >> Gerald >> >> [email protected] >> http://beagleboard.org/ >> >> -- >> For more options, visit http://beagleboard.org/discuss >> --- >> You received this message because you are subscribed to the Google Groups >> "BeagleBoard" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to [email protected]. >> For more options, visit https://groups.google.com/d/optout. >> > > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > For more options, visit https://groups.google.com/d/optout. > -- Gerald [email protected] http://beagleboard.org/ -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
