I'd be interested in fixing it, and sharing the info, but I do not know where to start . . .
On Fri, Sep 25, 2015 at 8:48 AM, Gerald Coley <[email protected]> wrote: > The one needling RMA is the flashing power LED. The issue you describe > does sounds like a SW issue of sorts, but is not one I have heard of that > often. > > Gerald > > On Fri, Sep 25, 2015 at 10:25 AM, William Hermans <[email protected]> > wrote: > >> Gerald, >> >> I actually have one of the boards that when issuing "shutdown now -r". >> About 1 time in 3, the board will not power back up - Well, not properly >> anyway. ethernet will continue blinking, power LED is on, but the USR LEDs >> do not do their normal thing. Trying to ssh in, is futile. >> >> This same board, when using "reboot" has not shown these same symptoms, >> and this is probably a software problem as I've noticed that it has been >> getting worst over time. For instance, this would only happen maybe 1 in 20 >> reboots a year or more ago. >> >> The board is an A5A . . . and yeah not going to RMA it, but I would not >> mind testing . . . >> >> On Fri, Sep 25, 2015 at 6:34 AM, Gerald Coley <[email protected]> >> wrote: >> >>> No testing needed. Request and RMA. >>> >>> http://www.elinux.org/Beagleboard:BeagleBoneBlack#RMA_Support >>> >>> >>> Gerald >>> >>> On Fri, Sep 25, 2015 at 4:41 AM, <[email protected]> wrote: >>> >>>> Hello Everybody, >>>> >>>> >>>> Yesterday I opened my BeagleBoneBlack (rev C) and started working with >>>> it >>>> >>>> Today while I was trying accessing it trough SSH I got and error and >>>> then I realized all the leds were off. >>>> >>>> Everytime I plug it back to the 5v adapter de PWR LED flash once and >>>> the BeagleBone doesn't boot >>>> >>>> >>>> I've been doing some research and I've found this link that describes >>>> my problem. >>>> >>>> elinux.org/Beagleboard:BeagleBoneBlack >>>> <http://elinux.org/Beagleboard:BeagleBoneBlack#Improper_Power_Down....All_Revisions> >>>> >>>> >>>> Is there any other test that I should do? >>>> >>>> >>>> Thanks in advance >>>> >>>> >>>> PS: I tried to flash a Debian image again, but it just didn't boot from >>>> the SD. >>>> >>>> -- >>>> For more options, visit http://beagleboard.org/discuss >>>> --- >>>> You received this message because you are subscribed to the Google >>>> Groups "BeagleBoard" group. >>>> To unsubscribe from this group and stop receiving emails from it, send >>>> an email to [email protected]. >>>> For more options, visit https://groups.google.com/d/optout. >>>> >>> >>> >>> >>> -- >>> Gerald >>> >>> [email protected] >>> http://beagleboard.org/ >>> >>> -- >>> For more options, visit http://beagleboard.org/discuss >>> --- >>> You received this message because you are subscribed to the Google >>> Groups "BeagleBoard" group. >>> To unsubscribe from this group and stop receiving emails from it, send >>> an email to [email protected]. >>> For more options, visit https://groups.google.com/d/optout. >>> >> >> -- >> For more options, visit http://beagleboard.org/discuss >> --- >> You received this message because you are subscribed to the Google Groups >> "BeagleBoard" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to [email protected]. >> For more options, visit https://groups.google.com/d/optout. >> > > > > -- > Gerald > > [email protected] > http://beagleboard.org/ > > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > For more options, visit https://groups.google.com/d/optout. > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
