Gerald, I actually have one of the boards that when issuing "shutdown now -r". About 1 time in 3, the board will not power back up - Well, not properly anyway. ethernet will continue blinking, power LED is on, but the USR LEDs do not do their normal thing. Trying to ssh in, is futile.
This same board, when using "reboot" has not shown these same symptoms, and this is probably a software problem as I've noticed that it has been getting worst over time. For instance, this would only happen maybe 1 in 20 reboots a year or more ago. The board is an A5A . . . and yeah not going to RMA it, but I would not mind testing . . . On Fri, Sep 25, 2015 at 6:34 AM, Gerald Coley <[email protected]> wrote: > No testing needed. Request and RMA. > > http://www.elinux.org/Beagleboard:BeagleBoneBlack#RMA_Support > > > Gerald > > On Fri, Sep 25, 2015 at 4:41 AM, <[email protected]> wrote: > >> Hello Everybody, >> >> >> Yesterday I opened my BeagleBoneBlack (rev C) and started working with it >> >> Today while I was trying accessing it trough SSH I got and error and then >> I realized all the leds were off. >> >> Everytime I plug it back to the 5v adapter de PWR LED flash once and the >> BeagleBone doesn't boot >> >> >> I've been doing some research and I've found this link that describes my >> problem. >> >> elinux.org/Beagleboard:BeagleBoneBlack >> <http://elinux.org/Beagleboard:BeagleBoneBlack#Improper_Power_Down....All_Revisions> >> >> >> Is there any other test that I should do? >> >> >> Thanks in advance >> >> >> PS: I tried to flash a Debian image again, but it just didn't boot from >> the SD. >> >> -- >> For more options, visit http://beagleboard.org/discuss >> --- >> You received this message because you are subscribed to the Google Groups >> "BeagleBoard" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to [email protected]. >> For more options, visit https://groups.google.com/d/optout. >> > > > > -- > Gerald > > [email protected] > http://beagleboard.org/ > > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > For more options, visit https://groups.google.com/d/optout. > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
